Helloi have some trouble with port securityi have configured my swith port:interface FastEthernet0/1 port security max-mac-count 1 port security action shutdown and after reload the port is blocked, PC which conected to this port don`t shut down.wh...
Our company's main Backbone Router Cisco 7206 is using Cisco Software Version 11.1. We are very recently experiencing a problem that the Router automatically Reboots very frequently 10-20 times a day and sometimes it takes 5 to 7 minutes to boot the ...
I have a scenerio where we have a network with two seperate Internet connections on different sides of a corporate WAN. Currently the connections are being used in isolation to save the internal corporate WAN bandwidth. We are interested in leveragin...
Did Cisco 2501 data rate can support T1/E1 connection ?In 1601R, there is a asyn/sync WAN port. Does it also can support T1/E1 ?In Cisco 2610, there is a fixed asyn connection WAN port. Does it mean I CANNOT use lease line and frame relay over this...
Hello ,I got exposed to IOS in a class I took 6 months ago..so I am rusty indeed. I just got this 2948G-L3 router /switch and cant seem to get off the grounf configging it.... anyone have a brief outline of the steps I have to this point gone through...
BEG YOU!!! PLEASE!!!! HELP!!!! I'M BEGINNER!!! WHO COULD HELP ME TO UNDERSTAND WHAT MEANS AND HOW CAN I INTERPRETE THESE STRINGS ON MY CISCO: 1.3.6.1.4.1.9.2.2.1.1.44 - locIfipInOctets IP 1.3.6.1.4.1.9.2.2.1.1.45 - locIfipOutOctets IP 1.3.6.1.2.1.4.4...
I have a Cisco 2621 router between my LAN (with 236 users) and three small routers connected to one ADSL Premium (2 Mbs) connections each one.Sometimes, on weekends mainly, the traffic in the three lines go down and the users doesn't work, then the o...
What is the best way to connect all of them together?- I have 1 router 7200 and 2 core switches Cat 6509 with MSFC. - I have to connect both of Cat 6509 with router 7200 (with Gigabit Module). - Router 7200 connected to Internet Link and Cat 6509 co...
Hi, I know that in ospf, "distribute-list in" command does not prevent the routes being propagate out, it only prevents the route being install in the local routing table. But when I do the same test for eigrp and rip, "distribute-list in" seems also...
Not sure if this is the right discussion area for the query but here goes...We currently use the netsend dos command to send instant messages, which flood the network messages, including all servers. Its not a very good way of doing it! I was wonde...
We use 6509 switches in our core with 5500's as floor switches. The 6509's both have MSFC's for routing. Is there an easy way to track down an IP address to a port on a particular switch. Currently, I capture the ARP table listing from the MSFC's to ...
Hi,we are using UTLite to collect NT usernames using the following command:UTLite.EXE -domain MLEME -host ldncw1.uk.ml.com -port 16236Can anyone confirm that using the DNS rather than IP address for the host will definitely work? (I don't want to us...
I am having problems getting a 3Com 3C996-T and a GBIC 1000Base-T module in my 3508G-XL with IOS 12.0(5.3)WC(1)Enterprise Edition. The card will connect and auto negotiate but the connection is unstable and drops packets. The patch cable I'm using is...
