Other Network Architecture Subjects

we have succesfuly installed the CVM over CISCOWORKS2000 with the default ports : 1000,1001,162 respectively for server port, poller port and traps port. the problem is that when running CVM module in CISCOWRKS2000 we are anable to log to the CVM ser...

Hi All,This deals with placing both a secure and non-secure IP segment on a catalyst 6500 series switch.From the back bone to the 6500 an IP address of 1.1.1.x (Private space). Firewall from there to 10.10.10.y (Public space). Firwewall comes from ...

Since installing a pair of 2610 routers to join our two sites, our firewall and web monitoring software both display "ThisAddressDoesNotExist" instead of end-users' IP addresses. This did not happen when our old IBM routers were in use.Also, our remo...

Head Office and Branch offices are connected over 128 Kbps leased line using Cisco 3620 routers. I want to connect a dump terminal on the Branch Office router through the Async Port using RS232-SS cable.Async port of Head office router would to conne...

Hey,i have the following annoying problem in a lab i`m doing.i have configured my cisco801 to dial with dialer1 b1 to isp and dialer2 b2 to another cisco 801 which only wait for the call ,his other b channel is not doing anything.the problem is that ...

Hi,We run osfind command under CSCOpx\lib\visigenics\bin directory and find out that port is not 42342 as it should be and on the screen it shows port number 14000.Just wonder what software is conflicting the port number.I had even used the SET OSAGE...

I have configured 3 NAMs in 6509s, using the NAM6KPROP11 properties file. When I view stats for Traffic Monitor and Segment Zoom, I don't get any vital signs, % Utilisation and Unicast/Broadcast/Multicast% statistics, but I do get packet size and de...

I am requiring to implement QoS in a Private Vlan environment.I want to limit customer traffic going through a particular MAC address without using MSFC( only with the PFC card ).I need this traffic be limited only by the switching process( PFC 2 )...

Hi everyone,I've implemented policy based routing to figth against NIMDA; to apply theese policies on Cisco 7500with VIP2-50 I nedeed to use Cisco IOS 12.1(7)E;the policies provide the matching of the strings of the URL on port 80, the setting of dsc...

Looking to use the 7200 series for a pt to pt DS3(electrical). Not sure about the ATM interface to the SAN solution and the implications this may cause for the SAN. Using Compaq Storage works and DRM.

I am working on a project that requires high-availability and failover protection. I just finished reading the white paper on high availability and have some design questions.1. In a mission critical scenario, where high-availability is required, i...

We would like to know, how to prioritize HTTP-Traffic over ATM-WAN-Links, which should be put in the LOW-Queue. All other traffic should have normal priority.We use IOS 12.0(7) on Cisco 2620.Best RegardsJoerg

We are using Polycom video systems on our company andI was assign to do it over the private IP backbone which consist of fractional T's to Europe. The first router hop bw is 1024 M and the second one is 1920K.I am presently using Low latency queueing...

I got a advise from a CCNP and it said that the encryption and compression are generally switched at processor level. For others such as ACLs, CBWFQ and Accounting, will the first packet is always consider in process switched ? Then, is it true if th...

i have a cisco 2620 and i want to connect it to my lan and work with netmeeting on my compiouters. in the incoming call no problem, but in the out going call i have a problem.i didn't know wher's the problem