Other Network Architecture Subjects

HiI have 1 HO and other 3 remote office and 3 isp line.ISP: metro, DDN, ALAPin my branch has router-pix-server.HO=3isp line, Bragul,Branew=metro,ddnbrankhu=alap,ddnin normal when 3 isp up then i can ping every server from server. when in branchgul no...

Dear AllNetwork equiped with 6509 gbic SX trunk with other 6509. The trunk interface with command storm-control, but once reboot one 6509, the trunk link cannot be up up, i need to key in the same storm-control broadcast command in order to up up the...

I have a router connected to a switch. I have vlans configured on the switch. When I do a show vlan I am unable to see the vlans. When I do a show vlan data, I see all the information. Why can't I see my vlans?Thanks

So here's my dilemma... I've inherited a Dell & Nortel network. They all connect to a "core" switch, which is a Dell 6024. We're moving our network to Cat 2960s and a 6509 as the core. I have the vlan database setup, and can talk effortlessly to all ...

Below is the config for our c3550 running I9K2M. You will notice that the 5 static mac-address are the same between port 0/37 and port 0/38. Those 5 mac-address devices are floaters, and we want them locked down but flexible to move between the 2 po...

I need to upgrade the IOS on a 6500 with dual sup720/msfc3/pfc3. However I do not have enough space on sup-bootflash or slavesup-bootflash to fit the new image. If I delete the existing images on sup-bootflash and slavesup-bootflash that were used wh...

On various switches I have devices connected to, some of the ports never seem to learn the mac-address of the connected device. Anyone have an explanation or fix for why this randomly happens?

HelloHelp with 2948G _ I am unable to ping the gateway. VTP has no entries in config. the config is as followsThanks in AdvanceMatt#version 8.3(2)GLX upload ! !#frame distribution methodset port channel all distribution mac both!#ipset inter...

cisco(config-if)#mtu 1600% Interface FastEthernet3/0 does not support user settable mtu.my show version looks belowCisco Internetwork Operating System SoftwareIOS (tm) 7200 Software (C7200-DS-M), Version 12.2(17a), RELEASE SOFTWARE (fc1)Copyright (c)...

Ok, got my Eigrp static route redistributed. But now Eigrp on site 2 complaining that every vlan is not "common" on both sites. Vlan192 links Site1 to Site2Site1 EigrpConfig:router eigrp 700 redistribute static metric 10000 1000 255 1 1500 network 10...

I have a router with two physical gi port.I create two subinterface on each gi port.internet = gi0/0.1remote site = gi0/0.2firewall = gi0/1.1local lan = gi0/1.2How can I create routing between the firewall and internet subinterface, and routing betwe...