I'm setting up a project that requires a cisco router, which is capable of doing 802.1q trunking. This is the only function I need to test with a 3rd party switch. What is the cheapest router that I can use to accomplish this.
IOS: c1841-advsecurityk9-mz.124-15.T4.binnmap reports port 1723 filtered.Acl 101 doesn't deny port 1723. I have try to remove acl 101 from FastEthernet 0/1, but the result were the same... With or without acl 101 on FastEthernet0/1, nmap reports 1723...
We are seeing these messages in our CAM logs:"Unable to add user to Clean Access Server <CAS IP>, [00:00:00:00:AA:13 ## x.x.x.x] username"While the clients see:"Invalid Clean Access Server"We are running 4.1.3.1 software and using In-Band for our wir...
Hi,I have installed CAM & CAS with 4.1.2 & configured everything was working fine.Then I upgraded to 4.1.3 then all the configuration of the CAs had to be done again.After cnfiguring I am facing a problem. When I am bouncing the port the port vlan ch...
HiI have been reading through the MARS manual and noticed that to manage switches they need to have a minimum IOS of 12.2. I have 14 2950's and 2 2940's which according to the cisco software advisor cannot upgrade to 12.2. Can i add these devices to...
The Remote office can't ping or connect to network shares via the VPN (Site to Site) now, but it did work. According to the ASDM the tunnel is up, but the remote office can't ping through the tunnel. I know the only thing that changed was the routes ...
is there any plan to add AIX as a supported O/S in MARS? I have some AIX systems set up as "generic" and not relishing the idea of having to define a pile of custom log parser templates. Keyword queries are about the only option I have right now fo...
Hi,I do have cisco 5000, 6500, 4500, 1900, 2950, 2960, 3750 switch into my network. I want to have mac based authentication using VMPS. My query is whether such old switches support vpms client
Trying to setup L2L VPN. Once the L2L is enabled, does it attempt to connect immediately? Also, how can I view the logs to see what is successful/failing on this or any other VPN connection.Thank you.
Hello,When I enter the "reload" command, Cisco ASA 5510 asks mea question: System config has been modified Save? [Y]es/[N]o:All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out whathas been modified ...
Folks, I'm looking for a way to customize the emails that are sent from MARS. Currently the From: field contains something like Administrator while I would like to change it to something more meaningful.Thanks, Yigal
Hi,Is there a way to Masquerade incomming VPN Client POOL on the dmz interface to access the dmz net ?I tried with dynamic policy NAT, without success.I already use this POOL to access local LAN via VPN Client.Is dedicated POOL a better choice ?NB: t...
We have an ASA5550. We need to shut down the appliance since the building is replacing the power unit. Is there a command that I can shut down the ASA5550 or you just power off the switch on the back? Thanks.
