Folks, I am deploying the agent kit for users and i do not want the users to see the security options(high,medium,low,off) what do i have to do to disable that feature?
We recently upgraded to 7.11. I say upgraded but in fact we installed a new pair of firewalls with 7.11 whose config we moved over from the existing 6.3(4) firewall.I am seeing a lot of messages in the logs like the following:%PIX-4-106023: Deny tcp...
We have a vpn 3000 series in Florida that is connected to a site in Atlanta.We have 6M broadband cable and the other end thru Internet is 5M burstable to 25M.On our end we are seeing (on the outside interface) large number of Duplicate Acknowledgment...
I understand pdm location statements help the pix track out which interface hosts and networks are reachable. However, when I configure a pix without using pdm it appears to function without any pdm location statements. I am wondering what would happ...
kinda OT, I know, but I'm currently using the above as reference for the SNPA exam.And- its not very good. At all. Howlers galore. I've already emailed Cisco with some of the findings but... no reply yet.Tonights example:"A policy map can be created ...
Hi There,I'm facing a "What I thought to be easy" scenario as following:I have an internal proxy server that listens on multiple ports (80, 443, 21 ...etc) and forwards these requests to an extrenal proxy (outside the network) with the same ports.The...
Hello,I am trying to get an idea of a recommended value for the embryonic sessions limit (tcp intercept) number for the nat and static statements on the FWSM. Any number between 0-65535 can be set, with the limit defaulting to 0 (unlimited embryonic ...
I'm interested in feedback on the following scenario: 871 Integrated Services Router for home office users...wireless and ports 1-3 are corporate and always-on VPN. Port 4 is 'open' to Internet, seperate from Corporate. Any personal PCs connect thr...
I have a L2L tunnel established between a pix and 3020. Everything is working but TCP. I did a lot of tinkering on the 3000 running 4.7 and could have inadvertently caused this, perhaps? The ACLS and debugs on the pix/router side are showing TCP i...
Recently, i have installed a pix501 which replaces my proxy server. I have position my PIX facing the internet with PAT since i have a single dynamic IP outside. I have also a router with IP/VPN connections to my branches. My problem is if i used my ...
Hello,I have FWSM Firewall Version 2.3(3) with multiple contex mode. How can I clear arp table in one of contextes (i.e. admin context). clear arp doesn't work. Thanks in advance.
