Received the following:Error Number: 0x80040706Description: Object reference not set.Setup will terminate.What does this error represent? How do I get around this erro to install the agent on a 2003 server?Thanks
Received the following:Error Number: 0x80040706Description: Object reference not set.Setup will terminate.What does this error represent? How do I get around this erro to install the agent on a 2003 server?Thanks
hi,we're deploying an internal firewall on our network, it's supposed to secure one of our departments. i wanted to make it so that the ip of the department that we want to secure appears the same to the "outside" network, no nat translations. we're ...
After installing the Secure Desktop Manger, I cannot save the configuration after making changes. When I click save, nothing happens. I have a 3030 v 4.7.2C with Secure Desktop v. 3.1.0.28. I have tried to uninstall and reinstall to no avail. I al...
I can't see a neighbor WS-C3548 connected to a WS-C3524-XL-EN. The uplink ports are set to trunk mode and were previously working. The following error is being generated "Can't flush DM 0 queues 04, status FBFB0404 mode FFFBFBFF". Rebooting the WS...
Greetings, today (1/9) I purchased a Cisco 831-K9-64 router, and I was curious if there was a standard IOS installed on it? I'm attempting to fill out some paperwork that needs to know the IOS version number, and since I just ordered it today, I do...
in the case enabled the three options(autuentication, DHCP and pool) in the address management assignment menu, how can I get IP address from pool for a specific group instead of DHCP?
I have been experimenting with ACLs on users VLANs in order to protect the network. ACLs to prevent IP spoofing, and preventing destination addresses like 0.0.0.0/24 and 127.0.0.0/24.I also would to take means to prevent users from even conversing o...
I am currently using WebVPN on my 3030 to use OWA. Can anyone tell me what other apps they use via WebVPN?
Hi My Name is HowerI have cs-mars problemI want to use cs-mars 4.1.2 to collect Manhunt 3.0 snmptrap.but when i query event data cs-mars will show "unknow device event type" i had follow user guide to config ,why can not work.have any one can resolve...
Hi,I have a newly configured 1811 router. When configuring the firewall, I ticked the option to allow SDM to be used remotely.Is there a standard port that SDM listens on? How do I access it?Thanks
How do you configure the ASA5510 to allow S (secure)FTP traffic to flow?
There are two 6513 SW and a public IPwhich wants to connect to the internal network comes through 2nd 6513.the virtual server and server farms are created but stil the outside ip is not able to access the internal app.
Hi, Currently I am using asa 5520 with PIX 7.0(2). I experience asdm problem. When I asdm into asa firewall it shows "the number of asdm session has exceeded 5" Try console in and run serveral time of "asdm disconnect 0 and to 4" both in privilege...
After a recent IOS upgrade on our concentrator to vpn3005-4.7.2.B-k9.bin to enable the SSL VPN function, we noticed that the clients version 4.6.01.0019 timeout and lose connection when the connection is idle (approx 8mins) regardless of any settings...
Dear ALL,I need your help about two questions:I cannot ping (or getting other services) between two machines both connected to the inside zone.One of them, is configured with public IP and a static is applied like this:static (inside, outside) 213.21...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-09-2025 12:34 PM | ||
04-09-2025 04:10 AM | ||
04-09-2025 04:03 AM | ||
03-27-2025 12:33 PM | ||
03-27-2025 10:07 AM |