Resolved! Dynamic Routes on a FWSM
HIDoes anybody know how many dynamic (OSPF) routes a FWSM can handle. I can´t find this information on the web site so if you know of a link that specifies this I´d much appreciate it.Thanks.
HIDoes anybody know how many dynamic (OSPF) routes a FWSM can handle. I can´t find this information on the web site so if you know of a link that specifies this I´d much appreciate it.Thanks.
Hi all,Is it possible to simulate/reproduce a handful (say 20) of intrusion/attack signatures in order to confirm that the IDS is indeed detecting them? Is there a freeware that's something like a "signature generator"?Thanks.
I've got this message %PIX-6-106015: Deny TCP (no connection) from 10.220.4.110/3999 to 10.219.65.91/ 25689 flag ACk interface outside,When I tried to connect to a device out of my network, the rules into the fw are ok, any comments?PDMy PIX is a Cis...
I would like to specify more than one DNS Domain Names in the Interface Configuration of a VPN 3005 Concentrator. Is this possible?Thanks for help.
hican we use a wildcard mask of 255.255.2.255 on PIX.that's to allow 253hosts in the third octet.thanks
hi what is the significance of using netmask for dynamic nat in global command and what's the differnce between using the netmask and using the range say 10.1.1.50-10.1.1.55 in global.do both have the same effect? or different? thanks
Hi, we have a problem to use Pat from an inside client to an outside ftp serverex: global (outside) 10 xx.232.3.13 nat (inside) 10 10.28.32.0 255.255.254.0 0 0 When we try to ftp for ex....
Hey NetPro ppl,Is it possible for a VPN router (3620) to hand out routes for PPTP clients? I can send a default route, but is there any ways to only send more specific routes to PPTP clients?Here is what I got so far:SYD-VPN-RTR-GW#sh runBuilding con...
Hello. I am running IOS 12.4(1) on a new 837 router. VPN clients can connect and access internal network. However I cannot seem to get split-tunnel working.837 has single static public IP. I am static NATing some ports to internal servers. I hav...
Hello,Our company is having two links with our providers and we want to use these links for a point to point connection, our provider cannot route our private IPs and they provided thier own IP range, so we've tried to create a tunnel between these l...
I've router ( f0/0 - 192.168.16.1) --> connected to PIX ( outside-192.168.16.2,inside-10.20.0.15).Part of PIX config-access-list input permit ip 192.168.16.0 255.255.255.0 10.20.0.0 255.255.252.0access-list input permit ip 192.168.16.0 255.255.255.0 ...
Not sure if I should post this here, but I just wanted to verify that I am correct in the assumption that you can use VACL's on a Catalyst 6500 switch (PFC needed; MSFC not needed), but not on a 3750 Series Switch, correct? If I am wrong, please let...
Hi,i can not find any information about this command: "svclc vlan-group". I found it after upgrade the sup720 from 12.2(18) SXD3 to 12.2(18)SXE2 with vlan-options from the configured firewall-vlan-groups:svclc vlan-group 1 799,800,1000,1001svclc vla...
Hello all. We are having a rough time getting our Altiris products (Patch Management, Inventory Solution, etc.) to play with our Cisco Security Agent. CSA stops Altiris from executing just about anything.I was hoping someone else out there might h...
hi allhow to know that which kind of layer 4 service(tcp/udp) can be used based on a given port say from 0-65535thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-04-2024 12:11 AM | ||
08-14-2024 02:32 AM | ||
08-13-2024 10:56 PM | ||
08-07-2024 05:42 AM | ||
07-05-2024 02:02 AM |