Other Security Subjects

I did the upgrade to VMS 2.3 and then installed the CSAMC 4.5. The upgrade seemed to go ok, although it didn't like my license files for some reason. These were reinstalled after a reboot without an issue.I get the 2 MC's for CSA 4.0.3 and for 4.5....

Hello,I was using MAC ACL to filter traffic between two hosts. The ACL seems not to be working when I tested the ACL with Ping packets. The documentation says that MAC ACLs are used to filter non-IP traffic, such as IPX, DECNET, ARP etc.But my argume...

I have a VPN 3000 concentrator at the HQ. Two SOHO remote sites connect via VNP to it through 831s. The sites can reach servers inside the HQ without issue. They cannot reach each other. Site A is the HQ with a 192.168.0.0/16 rangeSite B is a SOH...

Hi Sir, I'm a newbie to FWSM. I'm going thru some configuration examples of FWSM in transparent, multiple security context mode. Refer to the following example, http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_module_configurati...

I am still trying to have this PAT translation and NAT issue resolved. Here is what I have done: |------------> DMZ1 (security90) | (172.16.28.0 255.255.255.0) | | | INSIDE (s...

i need an extensive resource on ping in firewallsthanks in advance

I'm doing this and it's coming back with no response:ping inside 192.168.2.1 # ping inside - dmzI've been burying myself in pix docs... I'm attaching my pix config.....-robert

I have a management requirement to be able to produce reports regarding the ACLs on several PIXs. Is there any tool out there that can read a configuration file and produce a report based on the ACLs I have configured?Currently I backup the config an...

Hi All,I am in the process of creating a new 4.0.3.C version vpn client for Windows which involves deleting couple of existing .pcf files and adding 2 new .pcf files. I created a self-extracting executable and installing it on a new machine works fin...

Hi VPN gurus,Can someone help me with the following questions. I am trying to make a decision to buy a 3005 or a C5. Your expertize will be greatly appreciated. Thanks in advance.- What are the differences between the C5 and 3005 besides the name and...

do we need to have both an access list and static command when accessing a high sec. level inf.from a low sec. level inf. or any one is enough.thanks in advance

Does anyone know where I can find the downgrade procedure for PIX 7.0 to 6.3(4)? My colleague upgrade my PIX to a ver 7 w/o my knowledge and when i try to downgrade to a version 6.3(4), the IOS keep rebooting. It seems that the IOS has crashed.

Hi all, I have a 515 with 4 interfaces that are relavent. Inside (100), DMZ (50), bCat (20), outside (0). The bCat interface is a totally seperate company that is utilizing our firewall. The company on the bCat interface has their website hosted o...