Other Security Subjects

Does anyone had tips and techniques for managing large configs on the Pix. The company I work for now has a massive config with about a hundred servers and ports all over the places. Not exactly an easy config.I also recently installed 6.3 on the f...

I'm starting to see the following failures in my Clean Access Manager event logs:08:00:46:E8:EA:8A could not be added to the certified device list (Database error) What should I be looking for to correct this ?

Hi;Have anyone seen something like this before when trying to connect to a citrix box using cisco vpn client 4.6.XX and what possible steps can I take?The issue is that as soon as the connection is madeit disconnects and retries again, thus going int...

Hello, I have a vpngroup definition in my PIX (version 6.3), and when I view the configuration with "show running" the command "vpngroup xxxx password ******" show the password with asterisks, but when I donwload the configuration with tftp it s...

Is it possible to setup a PPTP connection to a Cisco VPN concentrator using EAP Proxy for the authentication and require encryption? PPTP, MSCHAP and encryption works fine. As does PPTP, EAP Proxy without encryption. But I can't seem to get PPTP, EAP...

we have a cisco 2620 which appears to have been hacked ... we were unable to telnet to the unit on either port; when we connected to the console the system would not allow us into priveleged mode ... doing a show user surprised us with a telnet sessi...

Good Morning Team,I have three locations. New York, Atlanta and Maimi. There is bandwidth issue in New York. I have Pix 506 in NY, Concentrator in Atlanta and Pix 501 in maimi. VPN traffic goes through the concentrator in Atlanta both way. Do you kno...

I have an exchange 2003 and outlook 2003 clients, after connecting to my 3005 concentrator that have the latest software I get timeouts on my outlook client. Everything else works normaly, I can connect to my server remotly and my outlook authenticat...

helloI have PIX firewall (525) which connected to DMZ zone, the DMZ zone contains a private ip address let say 192.168.1.0/24, and i have also two servers in the DMZ :server 1 : private( 192.168.1.10)server 2 : private (192.168.1.11)and every server ...

I cannot log into my Pix 515 via the WebUI. It was working, but now its not. I have checked my Java, and I have the latest version.Help.thanks

I have a PIX (v6.2)firewall and that has been working fine. A few day ago it is not getting an external address. I connect via DSL using pppoe. I know the dsl is up because if i bypass the PIX I can connect. I can connect briefly if I change the aut...

All,This is a pretty easy question, but something that I can't seem to locate. I need to know whether the Cisco 3524XL and 3548XL switches support 802.1x. I don't think they do. Also, I was trying to locate info on 2948G series switches, and I found ...

I have an isp router to which the pix 501 is attached. The pix also has a lan connection to our internal net. Do I need rip or ospf on the pix? Inside or outside? Rip 1 or 2?I have the acl list set up to allow smtp in from outside but it's not workin...

I want to block the following IP range 195.184.204.64 thru 195.184.204.127, is it possible to do this via an ACL? I know I can do it if I enter each IP with a deny statement, but I was wondering if I could do it with one line of code.Thanks

Does anyone know if the issue with some versions of autocad (as outlined in bugwatch CSCec83770) has been addressed in version 4.5?