I have 2 websites on a server, port 80 and 81. There are 2 external IPs to assign 1 for each website. I have the following configuration but doesn't seem to work for the port 81 website.static (dmz,outside) tcp x.x.x.5 80 10.8.10.17 80 netmask 255.25...
Hi,We are testing CSA agent, and users seem to get very slow logins to PC after boot. I also noticed that Winlogon.exe seems to be in task manager for up to 15 min., and PC's hard drive activity is clicking non stop.Did anyone had this problem with ...
I have got this ACL and routing policy enabled on one of our router which allow only IP within 10.0.0.0 to and fro selected interfacesaccess-list 150 deny ip 10.0.0.0 0.255.255.255 10.0.0.0 0.255.255.255access-list 150 permit ip any any!route-map i...
I am configuring PIX515R,i just connected the pix to one interface and I can login to pix using telnet and through console, but through PDM it will give me the user verification screen when i gave the host name as user enable pwd () as the password i...
is 1721 router can support 3 des encryption???is 1721 router can support vpn module?????
Dear AllI have a problem with my smtp connection through my PIX vers 6.2(2). I found that if an aknowledgement packet is lost before getting to the PIX the retransmission of the packet is not recognise.Below is the debug fixup tcp result.Any ideas wh...
We have a server that we have deployed a File Access Control rule over a particular directory so that changes to files in that directory are denied. This works as intended for one exception.1. Mount a windows share to the directory2. Copy a local ...
We are using 2 full unrestricted licensed PIX525s which are load balanced in a sandwiched config:public traffic ---> external load balancer ---> PIX525 farm ---> internal load balancer ---> server farmmy question is: i need to pass traffic from the ...
I hope this is not a stupid question, but I was wondering if the pix501 or pix506E supports port and ip address access schedules for inbound and outbound traffic. I would like to open and close ports for a particular web server at certain times duri...
I am trying to get a handle on the CTR application. I have it configured to what I consider a fairly operational state. I am blocking the CTR server from accessing most of my networks with an ACL and slowly letting it out to more and more of the net...
I am trying to get Threat response up and running to figure out what is real on my IDS. I have it going, but I need tyo tune it some. Does anyone know of any better material than the user guide to help with this. The user guide is pretty plain and no...
I have a Threat Response server setup and configured. All seems to be working fine with the exception of running agents on protected hosts when an event occurs. The agents do not run or error on all protected hosts that are out on our DMZ. The CTR...
Is there a proper sequence to follow when removing a vlan from the FWSM, or do you just start hacking away (no nameif, no access-group, etc)? TIA.
Hello,Can someone suggest a good syslog utility that will meet the following requirements:1. Free2. Will run on a Windows platform.3. Has the ability to roll and compress logs at a specific time.4. Free.Thanks,Dave
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-30-2024 10:06 AM | ||
09-04-2024 12:11 AM | ||
08-14-2024 02:32 AM | ||
08-13-2024 10:56 PM | ||
08-07-2024 05:42 AM |