Hi,Any idea if there is a technical difference between the two types of Fiber in regards to the bandwidth? we will have a services running through out the building (240 m high),Both single and multi mode are giving the same bandwid...
Hello, everyone! I have an odd issue I am hoping osme of you can assist me with. We use two older Cisco 7200 series routers running SSG to handle access and authentication for one of our bulk ethernet services. This service has grown so we are rep...
Hi everyone,I have been doing some online research about IP SLA on 6509 switches and i have not been able to find really any good information.We have two of these switches (we are a hosting company) and i want to setup some backup connections, using ...
Hello;Extract of the output of the command sh int linecard 0 subscriber name xxx is as follows:P_MibSubCounters16[0..31][0..1]=0*2,2841,32401,0*2,1,0*7,60,616,6,21,3,0*7,18,2789,0*20,18,223,0*4,82,1687,1,6,0*6P_MibSubCounters32[0..31][0..1]=0*2,34354...
Dear all,I want to ask about Cable broadband, using UBR10012.I have try to use DS Resiliency (Using cable rf-change-trigger command with cable resiliency ds-bonding) in IOS SCG3 version and wideband resiliency in IOS SCC7 version, but i can't find a ...
Hi,I have installed SCE2020 with version 3.6.5 in between a mikrotik to which users call through pppoe, and another router where the GW for those users is created, then to the internet.When i launch show int linecard 0 subscriber all-names command, i...
Guys!I've got a 4Mbps Internet link over fiber optic from my ISP. I need to upload heavy files to a US based server on daily basis. The latency between source (Pakistan) & destination (US based FTP server) is around 340 msec on avg. On a single file ...
Dear all,I want to ask about Cable broadband, using UBR10012.I have try to use DS Resiliency (Using cable rf-change-trigger command with cable resiliency ds-bonding) in IOS SCG3 version and wideband resiliency in IOS SCC7 version, but i can't find a ...
Cisco 7600 reports in log Jun 22 02:21:38.315: SP: FAILED to write to DS1338 RTC deviceit reports every day can anyone helps what it means ?BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)S...
Hi everyone;i was going through some of the configs on our service provider managed cpe device. policy-map CUSTOMER_POLICY_INclass class-default police cir <EF policing rate in bps>bc <Policing Burst Parameters, in Bytes> conform-action set-dscp-tran...
Can anyone share the knowledge about how vpls is fuctioning if we have cutomer(eg: cust A) at one site and the customer A has a branch at different geograpgical sitse. How vpls can handle diffrent vlans from a single customer site? Please sha...
Hi All,I've combed through reference and config guides but cannot find documents pertaining to the following command under isis:nsf advertise-holdtimeDoes anyone know exactly what this does?Thanks
HelloI want to use qinq tunnelling in my network. I have 2 cisco 3750 on the edge terminating the qinq tunnels, but in between i have cisco 2960.My question is does cisco 2960 pass qinq trafficThank uSent from Cisco Technical Support iPhone App
HI,Simple quetion we are trying to pull interface usage in mbps or bps from SNMP to a Nexus 5548p.We cant seem to use the normal mib we use for this against IOS devices which is 1.3.6.1.4.1.9.2.2.1.1.8 for Out bits sec and 1.3.6.1.4.1.9.2.2.1.1.6 fo...
