Other Service Provider Subjects

I configure some basic control-plane for 7600 router.the router is using LACP for ehterchannel.How to add the LACP for the control-plane ?=========================================ip access-list extended cp-critical-in permit ospf any host 224.0.0.5pe...

Dear all,I would appreciate your help in my current issue. We are running UC - System version: 6.1.3.1000-16 and the point is following.I need to set up an emergency phone, which means that if anybody picks up the handset, the telephone directly call...

There seems to be installation and user guides for Insight 3.3 release on Sept 11th 2012, but no download, does anyone know when 3.3 will be out?

To whom it may concern:Our main problem is a connectivity issue, that follows them following pattern:We have a DSLAM connected via an ATM cloud to our BRAS named iadsl-tlx-staana-2, the assigned IP address to the DSLAM is 201.122.81.209; this one has...

Hello,My customer has requested to activate the QM functionality on his existing service control architecture (one SM and one SCE 8000 Ver 3.7.1).By following the activation instructions the QM service got up and running.I've created a new package fo...

Banner support on the DCMIs it possible to run the banner from the DCM using the script, without Rosa NMSThe thing is that I would like to run the banner every 1 hour for 20 sec using the script ThanksIsrael

I need IOS XE support. where is Discussions please help.

Hi,As per the configuration guide, maximum buffer size configurable per class is 491520 bytes. If i have a class with bandwidth percent 90, which will reserve 900Mbps out of 1Gig port, the latency offered by this buffer will be 4.3ms. It seems that t...

I am farily certain this front panel LED display message indicates bad or no RF. I have been through many Cisco documents off of the sitre and have not found one to verfiy and confirm for our Tech Ops group. Does such a document exist and can a copy ...

Hi all,Our customer is a mobile operator. They need a integrated solution for caching, QoS and Loadbalancing in a combination. From my understanding of their goals, they need to providing stable and speedy broadband access as well as good user experi...

I have an M-CMTS with RFGW1.I have the following settings: int c6/1/3 downstream Modular-Cable 1/0/0 rf-channel 16-17 upstream 0-3 int c6/1/4 downstream Modular-Cable 1/0/0 rf-channel 18-19 upstream 0-3cable fiber-node 9  downstream Modular-Cable 1...

We are currently planning to test the MPLS/VPN functionality on SCE 8000. But I have noticed that the below document mention that (MPLS/VPN functionality is not supported on the Cisco SCE 8000 platform).http://www.cisco.com/en/US/docs/cable/serv_exch...

Hi,In our broadband ADSL service, we use 7206-NPE-G2 as Bras and standard radius as AAA server working together. In normal situaton both (Bras & AAA) work together properly and all AAA functions (Authentication, Authorization and Accounting) are fine...

Hi all,Any comment please?Regards,--Narjess            Hi,I am using an ASR1002 (Chassis type: ASR1002 , ASR1000-ESP5, ASR1002-SIP10, ASR1002-RP1) as a NAT64 router.Performance tests on this ASR1002 when it is performing NAT64 showed that RP module C...