Other Service Provider Subjects

Hi all,Our customer is a mobile operator. They need a integrated solution for caching, QoS and Loadbalancing in a combination. From my understanding of their goals, they need to providing stable and speedy broadband access as well as good user experi...

I have an M-CMTS with RFGW1.I have the following settings: int c6/1/3 downstream Modular-Cable 1/0/0 rf-channel 16-17 upstream 0-3 int c6/1/4 downstream Modular-Cable 1/0/0 rf-channel 18-19 upstream 0-3cable fiber-node 9  downstream Modular-Cable 1...

We are currently planning to test the MPLS/VPN functionality on SCE 8000. But I have noticed that the below document mention that (MPLS/VPN functionality is not supported on the Cisco SCE 8000 platform).http://www.cisco.com/en/US/docs/cable/serv_exch...

Hi,In our broadband ADSL service, we use 7206-NPE-G2 as Bras and standard radius as AAA server working together. In normal situaton both (Bras & AAA) work together properly and all AAA functions (Authentication, Authorization and Accounting) are fine...

Hi all,Any comment please?Regards,--Narjess            Hi,I am using an ASR1002 (Chassis type: ASR1002 , ASR1000-ESP5, ASR1002-SIP10, ASR1002-RP1) as a NAT64 router.Performance tests on this ASR1002 when it is performing NAT64 showed that RP module C...

We recently purchased some D9828 from another Service Provider, and we're only able to view the already configured channels.  We've been able to reset these units in the past using the front menu, but these seem to have all editing functions locked. ...

It is possible to create LAG bundle of 10GbE interfaces on ASR1006?

We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running ...

I setup our D9854s for HD-SDI output with AC3. Looking at the SDI feed through a Tektronics WVR 7120, it appears it’s seeing the channels as PCM, with repeating noises. Also, my encoder does not reconize the audio at its input. We have several D9854 ...

I have two SCEs reporting to my collection manager and I'm using Insight to monitor this DB.One SCE is a 8xGE and the other is a 2x10GB.For some reason, on the 8xGE box, the links are backwards, so link 1 on the SCE is showing up as link 8 in Insight...

Problem:Some time don't give  chart   Global Bandwidth per Service,   Subscriber Bandwidth per Service and  etc. From 23:15 in different day chart don't painted, test Active DB all ok, mysql working on CM-servere, SCE : show RDR-formatterStatus:  ena...

Hi Guys,Am well out of my depth and was looking for some advice on providing ethernet over a customers existing coxial network. EoC.The customer is a large holiday resort who provide via coxial cable, TV to each of their cabins.The system that they h...

Lookign for some help setting up a L-4 redirect to a set of CacheServers. I am looking to forward all port 80 traffic going through a ASR 1001 to a group of cache servers. I am not looking for authenticated access through radius. I am just looking to...

Hey Guys,Just looking to see if someone can answer a quick question for me.Can you have multiple SIP carriers (Telcos) in the same CUBE device that is a 2921 router.Thanks