Routers - Small Business

I have a Cisco SRP547W small business DSL router at a site which also provides Wi-Fi using WPA2-Personal Encryption. Screenshot of the settings here: http://imgur.com/TbAMtN4 The Wi-Fi network has suddenly switched to being Open and lets anyone co...

Can this be done?  I have two that I am trying to connect together.  The setup is simple and fairly straight forward.  Not getting connected.  Figured I would double check that you can VPN these devices together. Thanks. 

Hello, Is there one way or another to do a kind of VRRP with 2 RV routers, each having only one ISP connection ? Kind regards.

After a few days my VPN will stop receiving any inbound VPN connections, EasyVPN, PPTP.   Port forwarding still works fine.  The only way to correct is to reboot the device from the power switch, the reboot command in the software does not do anythin...

Hello all,my router is not getting a WAN IP from my modem although my ISP confirms that everything is OK from a modem perspective.I tried deactivating IPS, Firewall, DoS, Block Wan Request / rebooting the router each time but without success.I also c...

Since the Static DHCP bug in 10.0.3.16 does not allow you to modify any Static DHCP listings I thought I'd modify the configuration and upload.  Instead I'm greeted with the error "The file cannot be changed." when trying to upload to Startup or Back...

I'm setting up a number of new RV215Ws.  I've set up the first one and saved the configuration. Now I'm trying to upload that same configuration into another unit. I see a very brief "running" bar like one would expect.  But it only lasts a brief tim...

Hello Cisco freaksI am trying to connect a branch office network (Cisco RV320 router) with our other branches Drayteks (2820, 2950, 3900). Both devices look to support common settings but fails to connect. Triple checked all settings, Tried all possi...

I am attempting to complete setting up my Cisco RV130W router.  I completed the portion with the initial password, but when I try and setup the wireless portion it asks for a previous password.  I have tried cisco, leaving it blank and using the pass...

We recently swapped RV042 V0, V1, V2 for V3s. I did a penetration scan and found:  "Critical Vulnerabilities: 1) Obsolete Debian GNU/Linux Version (debian-obsolete) 2) Obsolete ISC BIND installation (dns-bind-obsolete) Description: Debian terminated...

Please take a look to the nework diagram attached. I try to create two VPN Connections from roLAI01 and roDAI01 to roDLZ01. I attached all 3 configurations aswell. Fist, i configured the routers roDLZ01 and roDAI01. The VPN between them works fine an...

Greetings, I have a air-cap1602e-a-k9 that I have done a factory reset on(I unplugged, held the reset button and plugged back in holding button until lights blinked amber).  I have accessed the Webpage it provides when visiting the device. but i hav...

Hello all; I am trying to move a config from an old 1841 router to our new 4321 and am have issues with all my sub interfaces communicating. See attach for the config with ip changes of course. the 0/0/1.1 sub interface is communicating fine but noth...

Hello, I have WRVS4400N V2 router and I want to create captive portal, but there is no section in router GUI called Captive Portal. Can any one help me with a way to create captive portal using WRVS4400N V2 router ? thank you in advance.

Hi, Since the latest firmware upgrade for the RV320 router (version 1.3.2.02), split tunnelling works great for Easy VPN connections using the builtin client of Apple Mac and iPhone and this is nice. But I recently noticed an annoying problem: the c...