Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice) Fix for bug CSCwc53007- RV34x GUI not accessible – The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...
Resolved! VRF ping Problems
Hello,I need some help. I'm not sure what's going on with the VRF.No sure if this is a bug on the ASR1001.I have a simple setup: One Fortigate connected to an ASR1001 with an ethernet cable, then a remote Fortigate connected over site to site VPN t...
gem authorization
Hello there,A friend of mine has recently started a small business (gaming cafe). He currently uses two switches with 1 GB speed support and 1 home router from D-Link. He is facing major problems when it comes to connectivity or latency wise. He want...
Resolved! What can an ISR900 series actually do?
Hi, My provider is going IPV6 only - but I would still like to use IPV4 in my LAN. The IPV6 prefix changes every 24 hours from my ISP. So my question is..... Can an ISR900 do IPV4-to-6 and VPN(IPSec/SSL) and Firewalling (ZBF or similar) at the same...
Hello,I have an issue with a RV340 router. When I edit a WAN configuration in the WAN Table the router doesn't apply the settings.The procedure used is this:- Check the box near the WAN i need to edit and click Modify.- Modify the settings (i.e. sett...
Does anyone have the firmware RV34X v1.0.03.18?I'm looking for this specific firmware version as our course requires us to reproduce a vulnerability. Unfortunately, the corresponding version is no longer available for download on the official website...
Resolved! licenses for cisco ISR931 and ISR 926
I want to buy 1 ISR 931 for the central office and 4 ISR 926 for remote offices.Previously, we used RV 345 routers for which we only purchased security licenses at an acceptable price, and I verified that they worked even without these licenses. For ...
Hello guys,I did not find a way to disable TLS 1.0 for https in the RV340 settings.I would like to disable TLS 1.0 on port 443 due to security holes.
Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?
Resolved! replace RV345 with another newer product
Hello to all,We have a dual WAN VPN RV345 router that has worked well so far. However, the security license and upgrades have expired. We have the opportunity to purchase a newer product. What are the successors to this model, or what would you recom...
Hi, I'm experiencing some problem to configure my dmz with a rv340w. I aleady setup many dmz with other brand of router but first time with de cisco rv340w. LAN : (not the same ip but same setup) IP Range : 10.10.10.2 / 150Subnet : 255.255.255.0 Ga...
Hi, My Cisco RV260 router stopped booting from the bouth internal image files. I would like to create a USB boot drive with the original firmware (RV16X_26X-v1.0.01.10-2022-09-12-06-56-24-AM.img) , but I have no idea how to name the img file for USB ...
Is it possible to recover a password from RV345 without a factory reset? As far as I can tell our password was updated when it last expired but wasn't updated in any documentation we have.
Hi everyone!Please help me to understand, why under "line con 0" is "transport input|output ssh|telnet" command, how it used and how should I connect devices (ex.:RTR <-> RTR ) on L1 and configure them to make it work?Thank you in advance!
