Routers - Small Business

Hi AllI want to get a cisco router that I can learn on, I have a router in place that it currently bridged to a pfsense box which handle authentication for the adsl at present.I would like to get a box that could do the same thing as the pfsense box ...

Hello, since a few years I am using my service providers IPTV offer. I used it with a AVM Fritzbox. A few days ago I bought a Cisco SRP 546W to replace the Fritzbox.My ISP uses two PVC, PVC0 (1/32) for regular internet traffic, PVC1 (1/34) for the IP...

I am using DynDNS in lieu of a static ip. My ISP changed my WAN ip last night as expected however the RV180W did not update the WAN ip, and so the router is now offline. Using a secondary internet connection I have logged into DynDNS.com and checked ...

I have a RV082 router that is acting up. It intermittently prevents most clients from connecting to the internet and each other. I am unable to log into the web interface, but can ping it. Once I cycle the power on it, it will function for a short wh...

I have a brand new RV042 v3 that I just updated to the latest firmware (v4.2.1.02) and have stumbled across an anomaly... I can only access the router from the WAN port using port 80.  I happen to have it set to port 8080, but that doesn't work; I ha...

I have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does ...

Hello,  we are using Cisco RV042 router with i guess V3 hardware version, latest driver version (4.2.1.02). We changed the username and password from admin, default, to another name and password. Since then, we are able to log in only once, once the ...

Is it possible to configure the RV180W VPN to use IPsec and connect to that VPN using the built in windows vpn client in Windows 7 and 8?I have been testing this but I have not been able to get it to work.I'm not a VPN expert so could really use some...

I have a client that just got a second public IP (x.x.x.252) for a new program. I've setup that second IP on their UC540 on the public-facing port and it's accessible all day long from the outside, no problem. The problem comes in where users from wi...

I am trying to setup the following. We have an RV042 Router and are using it as our gateway at the office. In the office we are using a Windows Domain abc.lan with DHCP of 10.0.0 - 10.0.0.254. The Router/Gateway is setup with a Static IP of 10.0.0.10...

Initially we had a rv110w in place and had problems with the port forwarding stopping a few times a day so we replaced with with a RV180W. Now port forwarding appears to be staying up, however I have a new problem. We host a web page, for some reason...

HiI am using a Cisco RV110W (Firmware 1.2.09) in a branch and I would like to create a VPN Tunnel to another site that has a Cisco RV042 (firmware v4.2.1.02)What would be the correct Configuration??the current configuration I am using isin the RV042 ...