Routers - Small Business

Hi,Presently we have a wireless router connected to our RVS4000 so that guests can wirelessly use the internet.  We only use the wireless for guest access, not for company users or resources. How can we configure the RVS4000 so that anyone accessing ...

HiWe're running RVS4000 routers on 50Mbps cable connections. With IPS switched on, the maximum WAN > LAN throughput is 20Mbps.The solution to this issue is to disable IPS - full 50Mbps throughput then returns.However, that presents a new problem. Wit...

Hello,Does anyone know if you can manually set the Duplex for the WAN port on a RVS4000? I know it is possible with the RV042 but I'd rather use a RVS4000 since it has Gig Lan ports.

Switching from RV082 router to SA520 K9 router. In the RV082 router under the setup tab, and then forwarding. I have a udp and tcp service running on port 7195, to our server address 192.168.xx.x. I can not find where I would be able to do the same t...

Hello to anyone who can help,I'm trying desperately to get my RV120W to establish a VPN connection.  The goal is to let clients access via VPN client - do not need to do anything site to site.Due to constraints at the site, our only option is to plac...

So I just received by Cisco RV042 and I'm LOVING it so far. Only one minor problem, sometimes I'm not able to use some services (maybe b/c it bounces connections between the 2 public WAN (DSL + Cable), one example is SSH can drop after being connecte...

Hi alli have a RV016 router with 3 WAN PPPoE, 1 WAN Static IP, total of 4 WAN's connectionmy problem is i want to use PPTP on the WAN interface, in the Router WAN setup there is a PPTP connection option but when i click on it and i fill the needed in...

Hi,I have a VPN connection between two RVS4000 routers and IP based activity works no problem.  But, even with "NetBios Broadcast" selected in the VPN advanced setup we don't have succesful netbios function.  I can edit the lmhosts file on each clien...

Just setup a brand new RV120W at my house.  I have the wireless working, LAN clients connected, even got an IPSec tunnel to the office up and running.    One of the PCs behind the router is setup as a logmein client and tech guys from the office can ...

I'm planning to use RVS 4000 in 10 of my branch offices.The current IP's of those branch offices are 10.12.0.0/16 (255.255.0.0)When trying to configure the RVS4000 LAN IP I only have a drop down for selecting the mask and the largest one is 255.255.2...

Hello,I have been trying to connect to the RV 120w via the Quick VPN client, but no success.  See program log below.  I was told by support that this is something on my machine that is using port 4500 or port 500 or both.  So running netstat shows:C:...

I am trying to set up a PPTP VPN in my home (with a Linksys RVS4000 router).  I'm using a Mac to connect.I have enabled the pptp passthrough on the router.When I try to connect on the Mac, it shows 'connecting' and then 'authenticating' and then appe...

Hello!We're using the RV082 Router and having speed & reliability issues:Facts:Firmware Version: 2.0.0.19-tmDHCPNo VPN tunnelsThe RV082 is connected to a Catalyst Router (managed through our internet provider) and has a static ipIssues:Google Maps: C...

So heres what we are looking at here: The DHCP process within your RVO82 seems to be “quitting” after a certain amount of time. This seems to be ranging over a span of a few months (4-6 months) and power cycling kicks the DHCP process back in. Once t...