Routing

HelloProblem Description:I upgrade the IOS in the process, which has a 7606 device upgrade process in the case of illegal addressThere are two other 7606 devices that can be upgraded in the same way. Also I try the following way, but it does not take...

Im putting the 1921 into service and found that my internet speed is not what I was expecting. What is the expected internet speed through the router. I my ISP has me at 150 over 150 and can get that for the most part before the router. Plug in the r...

Hi Everyone, I have a question that I cannot seem to find the answer to in any documentation.  We acquired a company that is running OSPF as their IGP. We too are running OSPF. Both companies are obviously using area 0 so the question is how to best...

Can someone please share a “Network Assessment Questionnaire”.

Currently have a Cisco 4451 that has been having high memory utilization (97%), which we couldn't log in to the router via SSH. Since we were not able to remote in to the machine, we got someone to manually reboot. The memory did decrease down to 20...

Hello All, Device: ISR4321 Our ISR is configured to use a zone-based firewall + Access-lists for controlling traffic. One of our GigabitEthernet Interfaces is connected to a local ISP cable modem supplying internet access. The interface in question...

I have a home lab setup to understand networking a bit batter. I have a regular home router (asus RT-AC66R) and a cisco WS-C3560G-24PS switch. I have 2 vlan's. Vlan10 192.168.1.2 and vlan20 10.1.10.1. The router ip is 192.168.1.1. I have routes in th...

Hi Everyone I'm trying to establish an IPSec VPN between a Cisco CSR 1000V which is running in Microsoft Azure and an on premises Windows Server 2012 R2 RRAS server. I've used the sample configuration file from the deployment guide but am unable to ...

Hi, We are facing BGP convergence issues in NX-OS due to the OS not performing Fast External Failover for BGP peers between Sub-AS in a Confederation. If we simulate a link failure between directly connected peers, the protocol does not converge unti...

I am trying to remark inbound Skype for Business Online audio and video traffic with ef, af31 and af41 DSCP values using the following configuration. When I check for packet matches against the service-policy it doesn't show any packet matches (apart...

Because want the Router 2811 support for IPsec. find the version of the Support Service as well. Something of concern- Memory requirements or other.- License Base (eg IP Base image installed before the image is IP Service, will the system work?).

hi all, I need a quick verification to proof whether this works or not. This is a campus network. Existing we have 5 ospf nodes interconnecting each other via layer 3 p2p 1G links. We are installing new 10G fibers across all this 5 nodes on top of th...