Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Hi,we are trying to fine tune the mls cef maximum-routes without success for ipv4 on our Cisco 7606 router equiped like this: ######################################################Mod Ports Card Type                              Model              Se...

Resolved! QOS and Policy Map

 Gentlemen, I am just wondering if below qos and policy map configurations are correct or if there is anything that i am missing .... I would welcome any comments...=====class-map match-any b_classmapmatch access-group name b_aclclass-map match-any g...

Hi,we have a cisco 880 with 4 ports configured as switchport ports with dhcp and nat. Now we need to change one of the ports to be a bridge for a computer with a external IP, and we don't have any idea how to do it. We tried to set a static ip for th...

Vermes000 by Level 1
  • 328 Views
  • 1 replies
  • 0 Helpful votes

Greetings, i am currently using the configuration below to provide failover between two DSL connections, all is working fine but i had expected outbound connections to be load balanced between the two DSL links on a round robin basis, however looking...

Hi Experts,I have a request to setup aggregated traffic policing on a Cisco ASR 1001 router for multiple networks within a router.Lets say I have a router with several subinterfaces:interface GigabitEthernet0/2 description WAN ip address x.x.x.x x.x....