Routing

Hi,I have a bunch of routers setup in a lab running EIGRP and BGP.Currently the two routers that are BGP neighbours redistribute the BGP routes into some of the other routers in the network.I only want one router in my network to receive the redistri...

Hello All,I have a site that has 2 locations connected by a point to point. Each site reaches the Internet through a gateway local to it but can also get to the Internet out the other site's gateway if need be by just changing the default gateway on...

HI, we had a data provider come in and install 2 3845's for us so we could have redundant connections to thier site. They have told me they can give me only redundancy/failover or load balancing but not both. Is this accurate?The way is is set up c...

I have a 7120 and need to determine if it can have more memory installed. The 'show version' gives 229376K/98304K, and Total: 191252512, Used: 170820752, Free: 20431760. Opening up the box, however, show that both DIMM1 and DIMM2 have Samsung M374s...

Dear all,The node is supposed to give response for "bridge MIB table". when we checked the o/p of 'snmpwalk <node> 1.3.6.1.2.1.17' we are getting " dot1dBridge.dot1dBase.dot1dBaseNumPorts.0 : INTEGER: 0 " what could be the problem

I have a vendor telling one of our people that the 1841 router will only support 1 T1 WAN link. I'm pretty sure that is incorrect, but I thought I'd research before I start calling them out.I know there are two slots on the 1841 router, so my assumpt...

Can I use tacacs, apart from Radius for dot1x Authentication?

Hey Guys,Can you help me explain trace route in a very detailed way?! Well of course I know the purpose and how to use it but I just need to grab or explain something to our operations group about its output. They're so used to identifying latencies...

Can someone point out a vid or tutorial of some kind on vrf lite? Just to be clear, I'm a total newb so big writing, small words and preferably lots of nice pictures please!!Thanks guys,Brent

I have an 831 with IOS 12.3(2) and what I'm wanting to do is to only allow certain websites. I use SDM to configure and its telling me my IOS doesn't support the web filtering. If I update the IOS will it enable webfiltering on my 831? Is there ano...

Dear all,I often try to use a meaningful names for a service policy under interfaces. sometimes, the policy needs to be upgraded. This means that my 10MB_OUT policy for example needs to be renamed to 20MB_OUT.Can this be dealt with in an efficient ma...

Please refer to the drawings. I currently have 2 ISP providing MPLS Data connectivity. ISP 1 Provides connectivity to SITE A, B & C whereas ISP2 provides connectivity to site D, E, F. The central site has routes for both sites so all sites are being ...