Routing

Hi All, May i kindly solicit any help as to why some books configures EIGRP in a way illustrated herein.A router needs to advertise the following routes: 1.1.1.0/321.1.1.1/321.1.1.2/321.1.1.3/32And this was eventually advertised as Network 1.1....

Dear friends,Need a simple clarification.How to find ospf version running in cisco? ( not google;)or exactly,which command will show you the ospf version , which is running in your router?tnx in advancerajeev.s

except CLIany tool (SNMP or MIB)can monitorCSS Session(Src to Dst)tks a lot

Will GLBP do load balancing between 2 ISPs which are connected to 2 interfaces on the same router?In other words, I have only one router with multiple physical interfaces. Interface0 will be connected to ISP1Interface1 will be connected to ISP2and In...

Our entire office is made up of l2l vpn connections, and now some dmvpn connections. Our branch's are typically a 2811 router with an internet connection back to corp.I understand the limitations to point of QoS and using the Internet. I understand...

Hi,I have a strange issue, whenever the router reboots it loses its configuraiton.I have already done a "Write Memory" but no luck...router is 2800 series with IOS 12.4

I need to block all outgoing smtp traffic except for the mail server.. I implemented the followingaccess-list 102 permit tcp host 10.x.x.x any eq smtpaccess-list 102 deny tcp any any eq smtpaccess-list 102 permit ip any anyI applied it the interfac...

Client currently has a SOHO. This router appears to only handle 256 open connections. Has to be reset at least once per day. User count is 125. Line speed is 15Meg. We require a router that will handle at least 1024 open connections to the internet. ...

Needing to set some "next-hop" statements with a route map. These will be applied to Vlan24 interface (10.122.24.1/23). I want to split outbound (0.0.0.0) Internet access for Vlan24 across two endpoints based on the workstaton subnet. No issues doin...

Pulled out 3 1700 series routers for a project I have coming up. All 3 are giving me "Serial0 is down, line protocol is down". Am I missing something because I cant believe that they are all faulty?

I have a router that has a public IP address on it's serial interface. I have a device on the private side that needs to have connections to the public IP address translated to it for port 1720 (H323) traffic.However, I need to have traffic to port ...

Hi,i have this perculiar challenge...Branches A and B have working gre tunnels to the head office thru Service Provider 1 and branches C and D have working GRE tunnels to Head Office thru Service Provider 2.It was observed that after configuring "Kee...

Hello.I have problem with connecting 857 router to ADSL. The CD led on my router is blinking green but I can't get constant green light. Please look my attachments and help if you can see any problems.

Hi, is it possible to configure spanning (mirroring)in an ethernet port on a 7200 router? there is no option under the interface configuration, any ideas? thanks!

Hello,I am trying to configure a Layer-3 etherchannel between a 6500 running CATOS (with MSFC Layer-3 card) and a 6500 IOS device. IOS:interface Port-channel2 description G7/1 & G7/2 Ether to HAVC6501 7/1 & 7/2 no switchport ip address 10.5.3.177 25...