Routing

I have a hub and spoke network, one hub(BGP Cisco 2811 Router)and 3 spokes. The hub internet link is 15MB, I want to limit one spoke to use 4.5 MB. How do I go about this? Please assist.

Dear sir,iam having 3745 router it was freequently hanging so iam unable to sort out the issue.So plz any one tell to how to sort out.It was hanging then i forced to restart then it was working fine.Like the happning twice or thrice per a day.plz hel...

Hi,when configuring multiple classes using "bandwidth percent" and the class-default is only configured with the "fair-queue" command then what will be the bandwidth ratio between configured classes and class-default ?E.g.Class 1 is configured as "ba...

Dear sir,we have cisco 3745 router on that we r getting the fallowing error.so plz tell me how can i trableshoot.Please see the log snapshoot of interface reset Jun 5 11:25:25.135: %CLEAR-5-COUNTERS: Clear counter on all interfaces by consoleJun 5 ...

Can we run T1-E1 link with fast-Ethernet speed? if not then please tell me why?

Guys,I need your expertise, in my new 6509 switches. I dont know, why I cant ping my call manager from the coreswitch and from my call manager to core.I created vlan 3 (for voice)interface vlan 3ip address 10.133.3.250 255.255.255.0 Management vlan 1...

i need to open 4 ports on a router.ports # 80, 443, 6464, and 7575.i feel really dumb, but can someone help me out? its for a IPSEC, LAN-2-LAN connection. THey can send information, but cant receive, and these ports are closed. They need to be open. ...

anyone can tell me , please, how i can reset to original configuration , a cisco router 1802Best RegardsGerardo valdez

I have 3 E1 links between 2 routers ,1st 2 links are configured as multilink and 3rd one standalone .I am running static routing now my question is this multilink performance is not good u can say degraded and i want to move my traffic on standalone ...

I have a customer consolidating two WAN routers into one. The one router will have connections to two ISPs. They want to keep their two previous AS numbers. I do not believe it is possible to run multiple AS numbers on one router, but how would I han...

I am trying to access my internal network ftp from the outside WAN ip of my 851w from the internal network. When I try to use the WAN ip to access the ftp internally it fails. Is there a way to create a loopback to go out and back into the network?...

I am working on the refresh of the guest internet network project. In our network, two 7301 routers (7301-A & 7301-B) are configured as SSG routers, and two Broadhop servers are used for the service servers. Currently, 7301-B is turned off because it...

Hi I have configured tacacs in WAAS devices. after applied the config, i am succesfully able to login via telnet but unable to login GUI.any guide me to resolve the same