Resolved! GLBP Configuration
Hi guys, i stuck in GLBP, assume R8 and R3 line is down.is it possible to make VPC 2 go from right hand side ? which is VPC2->R2->R4->R3->R9 Remark: R2 & R3 is switch, Load Balancing is using Round-Robin
Forum Posts
hi,I have a wifi router behind firewall, i am trying to reach wifi web management from firewall outside interface but its not responding any idea i am not expert on asa appliances ( asa5520)i tried access list on outside interfacewifi wan management ...
Hi , as all know that there is the main factor whether to add all routers 50 or more in one Area or add a different area the factor is whether routers capability and Hardware are able to handle routes and able to handle all flooding that happens when...
Resolved! Network Fundamentals
if I have many routers, and there is a router in the middle impact a performance by dropping packet , ok how can I determine which one If I don't have monitoring tools ,If I did traceroute is it enough , can I do any other thing to check ,
Resolved! isr4331 as dns server
dear alli configured the isr4331 as dns server and it forwards requests to OpenDNS servers it works correctly without any problems my question is the dns records or hosts on the router do i need to clear them manually at specific periods or will the...
I am not sure if its a limitation issue or maybe its something that not suppose to be in a network,The network works great,in the beginning I only configured the connection between R6 and R8 as NAT OUTand the PC connect to SW7 would get an IP address...
Hello team, I want to redirect ssh traffic to a server for analyzing and reviewing (to PAM server), before go to real switches.for example when I ssh to 10.10.88.1, traffic go to PAM server and then go to 10.10.88.1;;I write an ACL for filtering ssh ...
Hi everyone,I am still working on getting my cisco router (C1111X-8P, ip base and sec licenses) up and working. I have managed to configure DHCP and NAT for my clients, but I am having trouble setting up firewall and access control.Interface configur...
internet keep going down and up many timesmy connection ( isp--asa--router--sw-sw--users)im facing an issue happen randomly maybe periodically that internet connection goes down forcouple of seconds and coming up again , and this effecting our calls ...
Resolved! Cisco 881 router is not supporting bgp
I have cisco 881 ISR router with c880data-universalk9-mz.124-24.T4.bin.When I try to run bgp it is showing error . and showing other protocols but not bgp.How can I enable support for bgp in this routerthanksNouman
CPU utilization for five seconds: 42%/37%; one minute: 47%; five minutes: 46% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 1 14464 64358 224 0.00% 0.00% 0.00% 0 Chunk Manager 2 4456 172912 25 0.00% 0.00% 0.00% 0 Load Meter 4 0 1 0 0.00% 0...
Resolved! Cannot ping 8.8.8.8 from access switch
I have a 4331 Router connected to ISP on g0/0/0 and to access (9200) switch on g0/0/1Access switch connected to Router on G1/0/48ISP - g0/0/0<ISR4331>g0/0/1 - g/0/0/48<C9200L>Configured both, can access internet on a PC connected to access switch but...
Dear all I am in the situation that my neighbor accuses me of having used his internet connection by connecting to his Cisco router from my home via Wifi.The router is a Cisco EPC3828D, i think this is an older one and I cannot find any documentation...
hi i need help to configure openvpn server bheind a c887vag-4gmy wan is on LTE 4G interface the openvpn server is on internal lan 10.10.x,x default gw for internal lan is 10.10.x.1LTE interface have a static public ip A.B.C.Dmany thanks for the help.
Dear community, I have a LAN with a Web (.2) and ssh (.3) servers, and PCs all in the same network range (192.168.1.0/24). I would like to have my servers accessible from the outside of the network and at the same time also allow the PCs to ping/surf...
