Hi I've got a cEdge (C1111-4PLTEEA) running version 16.12.3 IOS-XE SDWAN. All controllers are running 19.2.2. I am using Cisco automated certificates on controllers and onbox certificate option for hardware. I am struglling to make this router talk ...
Forum Posts
Hi team I wanted to ask a question about a design Currently tcustomer has a total of 50 locations, they use a hub and spoke type topology (They are equipment 4331 and 4321, the customer wants to use their equipment until 2028.) 25 with a layer 2 ...
So this is driving me crazy. I have a vEdge 100M behind a firewall that has control connections but no BFD sessions. "sh tunnel statistics" shows the correct SRC IP and a SRC port of 12366; the DST IP is correct as well and the DST port is 12346; the...
We have couple of APs in the Cisco WLC and updated of the names of the APs yesterday. The name has successfully updated in the controller but when we test with the wireless tester, it is showing up just MAC addresses instead of AP name. I tried reboo...
Hi, I have an account to register devices that will form the sdwan fabric, can I add another account to access with other permissions and not give my original access account? Thanks a lot ! Ciro Gustavo Mele.
Resolved! SD-WAN Viptella and Firewall
Hi All,Just wanting to know if it is possible to deploy the Vedges with a firewall behind them?Has anyone done this before ?Are there any caveats or issues with this deployment type?Basically looking to use a Palo behind the Vedges.Appreciate some fe...
Where can I read about difference in action local-tloc/local-tloc-list and tloc/tloc-list, or maybe somebody can explain?I think that set local-tloc is action which forces to change way via chosen tloc for some group of interest traffic or not?
How do vbond get new device information?1.Vbond get new device information when we add that device serial number in smart account2.when we upload serial file that we download from smart account into option i.e. Upload WAN edge list in Vmanage3.Others...
When trying to install Certificates on controllers (vManage, vBond, vSmart) I get the error message: “Failed to decrypt serial number from Certificate” I am running version 18.4.4 on all the Viptela servers and using the deployment guide : Cisco SD...
I am not able to route traffic fully through the tunnel. It is up and I can ping across to the other side of the tunnel. I can also jump on a host in Non-Prod VPC 1, DCS VPC, Prod VPC(example host from Non-Prod-10.16.22.100) and ping the CSR on the o...
I tried to subscribe to Cisco Catalyst 8000V Edge Software - PAYG - DNA Essentials (free trial) on the AWS marketplace, but I failed and was given the following note "The seller has not made this product available in the geo location associated with ...
Hi, Im having trouble with having more than one service insertion on a Hub in this case an ASA FW. I would like traffic from one site Site-id 6 (VPN10) go through one interface on the FW, lets say (Inside) interface destin to Site-3 VPN(10) On the hu...
Can I use vlan interface as WAN on the vpn0? On this list I can see name - Vlan, but when I choose "Vlan" vManage says to me - Invalid Interface Name. Must not include 'vlan'
Hi! Can anyone clarify if the Catalyst 8000 SDWAN does a bonded connection ( aggregate the bandwidth of both ISP)? Thanks
Resolved! BFD timeout for setted session
I changed color on my uplink interfaces for one edge. Now on the other edges bfd for old color is down, when it clears?
