I am currently building a new Viptela lab on version 20.10.1. I am at the stage of adding the vBond controller in the vManage GUI (configuration/devices/controllers), and keep encountering this error: vBond is reachable from vManage on VPN 0 (and vi...
hello, I have a cedge 1002-x does not show the Serial Number to upload the device to the smart account. EDGE02#request platform software sdwan root-cert-chain install bootflash:root-ca.crtUploading root-ca-cert-chain via VPN 0Copying ... /bootflash/r...
I'm trying to understand the cause of the high latency that I'm seeing in the latency graph on vManage.I have a few questions about how vManage collects statistics from devices:Is the loss, latency, and jitter information collected from BFD Poll Inte...
Hello everyone, I'm looking for my final year master thesis on telecommunications engineering. Currently, I am interested in the SD-WAN technology. So, is anyone can suggest me some subject or any problematic related to SD-WAN for my case and some si...
I did this config for nat overload in service vpninterface GigabitEthernet0/0/1.10encapsulation dot1Q 10ip address 11.11.11.11 255.255.255.224 secondaryip address 11.11.11.10 255.255.255.224no ip redirectsip nat outsideip nat pool natpool1 11.11.11.1...
Hi there is bgp neighbor relation between R3 and vEdge3, between R6 and vEdge6. R6 can ping R3. Can we send 6.6.6.6 to R3? R3---vEdge3-- --cloud ----vEdge6---R6--6.6.6.6/32
Hi Team, I am wonder that vmanage have root account. Some times, I use root account and ssh to vmanage, it still request password of the account. So the root account is still alive for vManage or be disabled ?Thanks in advance !
I have some problem, my NIM-ES2-8 was damaged on the isr4451, we changed the card to NIM-ES2-4 and now I can't change template, I want to replace switchport feature and when I aplly new template with feature switchport I get error inconsistent value:...
Hi vManage upgraded or move to a new VM. Are there documents talking about transferring something like certificates, key etc to the new VM? Looks like we can transfer these configuration easily, but for certificate, we have to take care of it in each...
Hi, I have a query, when implementing sd wan to a company, cisco provides the url to start loading the equipment, eg, vsmart, vbone, vedge, cedge. The vmanage load is done with an image provided by who... and the other teams are in the same way? Ki...
Hello Community,Have you ever seen this error before?This is happening after I fill up the information for SIG credentials and click on Get Key.Internet connectivity is working fine, no issue.I am using a virtual Edge in Azure.
Hello, The sdwan system has each vbond, vsmart and vmanage. In vEdge, we can see one peer vSmart instead of vmanage as some document mentioned. Is the below result correct? Thanks
Hi During the configuration for vEdge via device template, the last step is to attach the device template to vEdge. The below is the last step, and we need to do the last edit before the attach. The vEdge has three interface: ge0/0, ge0/1 and ge0/2. ...
Hi I am trying to attach device template to vEdge. In the last step, I got the below error message as below. I checked the template several times. but I could not find something wrong. Anyone can share some experience? Thank you
