Storage Networking

I'm currently using an MDS 9216. I've configured a Cisco Secure ACS 3.1 (Access Control Server) for AAA authentication and accounting. ACS works fine authenticating users accessing the switch using Telnet. However, users accessing the switch using...

I'm using an MDS9216. How can I create a regular user (Not an snmp v3 user) on the switch using the Device Manager. In oder words, which menu item in Device Manager allows me to accomplish this :username user1 password mypassword role network-admi...

I'm using MDS 9216. How can I make remarks in the configuration files that I store on the TFTP server. What character makes the line to be ignored.Thanx.

Guys, I posted this on the Data Center Networking forum but got no reply.... perhaps this is a better forum for the question....------------------------We are in the process of deploying a SAN environment (EMC Symmetrix) at two data centres and link...

hiwhat is the maximum size can be allocated forport naming and aliasing of MDS family ?customer asked because on brocade switchesthis size is limited and in huge configurationswith lot of ports in fabric and very long namingaka (portofswitchfootoserv...

I've been reviewing an MDS configuration guide called "Configuring System Security and AAA Services" (http://www.cisco.com/en/US/products/hw/ps4159/ps4358/products_configuration_guide_chapter09186a00801ba21d.html)In one area in says: "For each manage...

How do I enforce hard zoning on an MDS 9000. What is the command?Thanx.

I got 2 SN5428-2 on loan in order to try to interconnect two existing remote Brocade Fabrics via FCIP. I can only integrate the SN5428 into the Brocade Fabric if I enable interopmode on all Brocade switches. When this mode is enabled I can no more se...

Hi,Then I connect SunT3 to SN5428 in log I have only message :"Dec 03 16:14:01: %FC-4-TopologyOperChange: TopologyOperChange;9;0;0;0" and nothig changes (port remain"Inactive"). I have default configuration on this port:!interface fc2 enableinterface...

We are getting these error message when connecting iscsi 5428 to brocade switch 2800:Sep 04 11:39:54: %FC-5-EportConvergeAlarm: EportConvergeAlarm;61;0;0;1;[Thu Sep04 11:40:20.948 2003][A4100][Eport:0x7c604003.373.4 Port: 0/1][ELP indicates invalid F...

I want to know about EMC Clariion CX series certification for the SN5400.+, info about intallations in the world with those components.10XLior

Hi,Anybody knows what happens with the 8-port IP Services Module for combining iSCSI and FCIP in the MDS 9000 Family? Is Cisco going to leave iSCSI technology?In the next information:"Table 1: Cisco MDS 9000 Family Supported Hardware Modules and Min...

Hello peopleAgain, please sorry this question I'm very new in this Emerging Technologie. I Wish to know the difference between Fiber Channel and Fiber.I assume please do not laught, That a Bundle of Fiber ports conform a Fiber Channel am I Right ?Can...