Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Labels

Forum Posts

Start a conversation

Resolved! SFP TO FIBER COVERTER CONNECTION

Hello , Iam trying to configure the following scenario, i have a cisco WS-C3560X-48T-S , with 12.2(58r)SE1 ios , when iam trying to have the following connection CISCO 3560 SW with SFP port access vlan CAM------Fiber Cable--------->Fiber Converter...

Uplink and MDI ports

I wanted to learn about the types of Ethernet physical ports,especially the RJ-45 ports. I strated with serach what is Uplink port, and then I continue to serach about MDI, MDI-X and auto MDI. I don't understand if Uplink port is type of MDI port or ...

Resolved! NAT (PAT) Assistance

I am a cisco newbie, I have configured VLANS, dhcp, can get an IP address on my local machine. I can't seem to get out to the internet from said machine. Am I missing something in my NAT setup? Current configuration : 2220 bytes ! ! Last con...

Resolved! IOX XE code designators

My production asr  IOS XE software is   asr1001-universalk9.03.13.04.S.154-3.S4-ext.bin For a  IPV6 vulnerability I researched and found this "fix code" asr1001-universalk9.03.17.00.S.156-1.S-std.bin I am using the adventerprise license Could some...

Resolved! Catalyst 4500-E, Sup 8-E y WS-X4506-GB-T

Que tal, tengo un Catalyst 4503-E con  Sup8 E. Y no reconoció la tarjeta WS-X4506-GB-T. No obstante en el "datasheet" de la SUP 8E dice: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-728191.ht...

mavaldes by • Level 1
  • 975 Views
  • 6 replies
  • 0 Helpful votes

Resolved! Catalyst 4500-E, Sup 8-E and WS-X4506-GB-T

Hello, I have a Catalyst 4503-E with Sup8. And didn’t recognize the WS-X4506-GB-T. However the SUP 8E datasheet says: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-728191.html?cachemode=refres...

mavaldes by • Level 1
  • 615 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Qos on Switchport

I currently have the below configuration on a switch and switchport. M question... Question1:  If this port is connected to a server (no phone) should I remove the Qos settings on just this port? Question2: What happens with data only traffic with th...

Resolved! Auto QOS Configuration

Hi I have configured Auto QOS for the first time and just want to make sure I have done it right. I am using avaya phones (so enabled lldp) so my access switches have voice and data vlans on the access ports. The access switches are then trunked up t...

OSPF Flood War

ello everybody, I have the following problem on a WS - C3850-12S . The log is always the following : % OSPF - 4 - FLOOD_WAR : Process 100 re - originates LSA ID 10.250.250.53 type - 2 adv - rtr 10.255.255.59 in area 0 The funny thing is that both ...

Load more