Switching

We have 2 Nexus 7000 running NX-OS version 6.2.8a and have configured EIGRP between them. Equal Cost Multi Path seems to be not working when we tried to verify the interface statistics even if we are seeing that both routes are installed in the routi...

Hello I have configured my nexus 7000 with wccp. IP access list WCCP_Test        10 permit ip 10.10.150.0/24 any  ---< my network ! IP access list WCCP_INT_BC_1     10 permit ip 10.99.225.37 ---< bluecoat !  sh run | i wccpfeature wccpip wccp web-c...

Ive been trying to get flexnetflow on this ASR for sometime but have never gotten anykind of netflow data. Here is my config: flow record NTArecord match ipv4 tos match ipv4 protocol match ipv4 source address match ipv4 destination address match tran...

We are upgrading our University Network. We want two 6807 switches in VSS on the Core. All our sites and main buildings on the Campus will have 4500-X switches in distribution/head of cabinet dual linked at layer 2 to each 6800 Chassis at 10Gig (so 2...

Hi All, We have an asa fw with main public ip range and a secondary public ip range.Now asa is configured with one ip from primary range .Data center forwards second public ip network to this exact ip asa WAN port is configured. I need to feed intern...

Hi and good day, I have a difficulty in changing the IP Address of Cisco Switches in Ciscoworks. There is one switch that shows "unreachable" status. When I figured out, the IP Address of this switch is misconfigured. Is anyone know how to change its...

I have a setup that will require routing between 3 Vlans and have multicast contained within one of those vlans across 4 switches. For controlling the mcast vlan I will enable IGMP Querier on the vlan on one switch and IGMP snooping on all the rest, ...

Hi all, Please can someone explain what traffic, goes via a vpc? Thanks. 402

cisco ME-3600X-24FS-M Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.3(1)S, We are experiencing some rather strange behaviour on our ME3600. brief example. Source ip address 128.1.33.148 - ping 10.12.42.11 sucessful and can...

Hello,   I'm currently re-designing our network. We have a core-accesslayer design with a asa fw. We have need a couple of VLANs, 2 different internet connections, 1 based on destination address and 1 for all of the other traffic. And a DMZ. The cons...

All, I'm trying to setup multiple vlans to route traffic from multiple ssids on  netgear aps (which support vlan tagging). vlan 117 for guest wifi and vlan 104 for corporate wifi. The aps can connect to the netgear controller but in some instances t...