Switching

Hello,I would like to know if it possible to create a policy map in order to redirect the traffic ( 80 , http, 8080) to a proxy .My current equipment its a 3750X using a IP Service License I was reviewing some options but i want to be sure before imp...

I would like to group 4 ports but am I right in thinking that it's only possible on FastEthernet ports, of which there are only 2 in GNS3 7200 routers? Thanks.Mark

Hi,Can anyone please help me with any configuration guide for EHWIC-4ESW card please...also the difference in configuration between EHWIC-4ESWG and HWIC-4ESW if any?

Hello,How can i filter the request from one host inside a vlan to the other vlans?I was planning to use this :ip access-list BLKREQUEST  extended deny host 10.10.0.14 anyip acess-list BLKREQUEST extended permit any any.interface vlan 2ip access-group...

I have 3 different routers:2610xm x 12620xm x 2My issue is I can't create a vlan. I have tried the following:conf t(config)#int vlan 10                   ^% Invalid input detected at '^' marker.I have also tried:#vlan database(vlan)#vlan 10VLAN 10 ad...

Hello,Is there a free tool that can backup my configs on a scheduled basis?  I've been using Solarwinds Kiwi Cattools and we have hit a bug which they are looking into, in the meantime I was wondering if there is another tool I could use to backup th...

I have 2 new 3750g devices in a small environment.  switch1 acts as our collapsed core and has ip routing enabled, and is connected to a ASA 5510. There are 3 HP l2 switches connected to switch1 as well.   switch2 is simply a server switch.  switch1 ...

I have a port channel setup with each of the member ports reporting various errors.  Here is what I have for each port using the show int counters errors command:Port        Align-Err     FCS-Err    Xmit-Err     Rcv-Err  UnderSize  OutDiscards Gi1/0/...

Hi, just wiped a image and then reloaded by mistake. Any alternatives to Hyperterminal for xmodem?Thanks, Pat

Hi,I have a Cisco 7206VXR running 12.4(24)T3 IOS. It is configured with WCCPv2 using L2 mask redirection. I am using service groups and associated extended ACLs to select which subnets I want to redirect port 80 traffic from.It is working fine for th...

Hey all, we have a large Layer 3 network where I am at, basically it's like a big hotel for camp workers.Our 100MB internet pipe is full every night.  We will be upgrading in the near future.  For now I would like to make use of another 100MB interne...

Greetings, I have a couple questions I'd appreciate a little guidance with.I've been assigned a task to expand a 3750X switchstack consisting of 2 members (both WS-C3750X-48T-S) by adding an additional member of the same model.  The new switch will n...