Switching

Dear All,I would like to know whether this command is supported by CAT2960 switches "switchport trunk encapsulation dot1q". I tried it is not working. Do we have any alternate for this?RegardsBR

When creating a policy map what is the Conform burst?In the example below what does the bc (conform burst) do? Any hard fast rules for configuring the bc?7206#show policy-map SAN  Policy Map SAN    Class SAN-Class     police cir 167772000 bc 5242875 ...

Hi All,I am trying to implement DHCP Snooping in production network. I have gone through the documentations, but i cannot test as my company is small and does not have any spare.I know we need to trust the actual DHCP port and trunk. Also enable the ...

I am trying to work out which funtionality is best for what i am trying to do here. I need a platform on my edge facing my service provider on my datafeeds network taking in different trading services (Market Feeds). i would like to seperate the diff...

I have in place switching with both static and dynamic vlans (dynamic is done by radius). I have another vendors wirless equipment and it is working fine in this setup. I can not get my 1252 WAPS working tho. My 1252 GigabitEthernet0 interface is plu...

We have a 6509 SUP720 IOS switch that has suddenly started to randomly reload on it's own.There is no consistent time for the reloads.There is nothing in the log files to indicate why this is happening. There are no high CPU utilization problems prio...

I just configured a new 3945 router but the configs are not showing up in "sh run". Is there any trick with new G2 ISR's?Thanks

Hi,Kindly suggest a switch which can support approx. 300 concurrent users who will access application server and 12 TB NAS thru intranet. Total users would be1500 Customer has asked for a 10G switch, kindly confirm do customer require a 10g switch or...

can any bodytell what are the types of supervisor engine and how to choose supervisor engine.what are there forwarding rate etc....

Hello,We are having many problems to connecte remore users to central site through a wireless link using access-points.What is the problem:when we connect the PC at the central site in the same switch where is connected the server and the user execut...

Is there any way to make a 3550 switch simulate data going long distances, and giving it a higher latency and delaying packets sent/received?

We have 2 Cisco 4506 switches configured in redundant configuration (HSRP). Primary of them is crashing once in 6-7 days. Here is his show version:Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I5K91S-M), Version 12.2(25)EWA7, RELEASE ...