Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

Topology2 6500 core switches with 720 bxl supervisors with ACE blades2 6500 access switchesServer farms with servers behind the ACErouting protocol ospfI can ping from outside to the servers till the ICMP byte size of 375 beyond that the ICMP dosent ...

ppatki by Level 1
  • 1192 Views
  • 3 replies
  • 0 Helpful votes

Hi All,Iam new to QOS, i have read about rate limit command recently and some basic concept about MQSAs of my knowledge QOS will be used only when only there is congestion, Am i right ?If i had Rate limit command which matches RTP port with some X bp...

Hi all,i've setup a basic routing infrastructure with vlans, the cisco (GE0/0 208.105.69.43, GE 0/1 vlan local) is attached to the cable modem (208.105.69.41).if i ping google from the cisco it goes fine:blackDevil# ping google.itTranslating "google....

Koblensky by Level 1
  • 2331 Views
  • 2 replies
  • 0 Helpful votes

Hey everyone,We've just purchased anew 2821, however the software is out of date and I don't have a CCO login. So my question is, what smartnet contract will give me access to downloads (vpn client software, SDM updates, etc), without breaking the ba...

Hello AllIf I have two 6509's running as our core network and each 6509 is the active switch for half of the vlans. The 6509's are connect via 4 ten gig L2 port channel. My question is, when configuring HSRP is it necessary to enable port tracking in...

dvanzee by Level 2
  • 1589 Views
  • 6 replies
  • 0 Helpful votes

Hi,Looking for some advice on creating a SPAN port. The situation is something like this: there is an existing replication server (say ABC) and there is another server (say XYZ) which is sort of acting as log collector server. SPAN needs to be create...

suthomas1 by Level 6
  • 736 Views
  • 3 replies
  • 0 Helpful votes

Hi All,I am after a bit of advice. I currently have a 1Gbps connection between two sites. The server guys are looking to locate a backup of the companies TSM Backup solution at each of the sites - this will involve a lot of replication traffic betwee...

Hi, im new to Cisco (almost done with the first book), and i recieved a switch from my workplace. I get the thing set up with the serial to console port and the like and notice that I don't get the initial config dialogue, so I erase the startup-conf...

Roberek99 by Level 1
  • 2207 Views
  • 4 replies
  • 0 Helpful votes