Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

hi all,i wonder what is the meaning of 72bits in show platform hardware capacityPE007#show platform hardware capacity System Resources  PFC operating mode: PFC3B  Supervisor redundancy mode: administratively sso, operationally sso  Switching resource...

At random times in the day our Internet will go down in the office.  So far the workaround has been to just reboot our ASA and then when it comes back up everything is fine for a little while.When it is down, both the inside and outside interfaces ar...

Compeat01 by Level 1
  • 1783 Views
  • 8 replies
  • 0 Helpful votes

Hi ExpertsI had a Memory Leak problem in three "cisco WS-C6504-E" with "s72033-advipservicesk9_wan-vz.122-33.SXH4.bin image", the TAC found a Bug in this version (CSCsy78994) that was affected all services because a task (Service Task with id:4) of  ...

I've configured a load balanced environment using Round Robin and I'm having some trouble with connectivity from clients to the real servers. I've read through the papers on IOS SLB and they say that each new connection is assigned to a server based ...

I can get a hyperterminal connection to my SRW2024P if I reboot the switch while connected.  However, it won't respond to any input after it displays the prompt:     Please press <Enter> to display the menu!Any ideas?

UkiahCoop by Level 1
  • 786 Views
  • 1 replies
  • 0 Helpful votes

Hi,since two weeks i have my switch1 (2960G 48 port) who get (receive) a lot of FCS errors on the port who is pluged to my another 2960G(who don't  display any fcs error ) and every server who is pluged on my two switchs drop packets , get sql,http,n...

cbourrier by Level 1
  • 7439 Views
  • 13 replies
  • 0 Helpful votes

HiI have a 6509 which just wont ntp sync no matter which synced up device I point it too, I think it's something to do with a server that should be getting it's ntp update from my switch which you can see in paste below. This switch is connected to a...

ktwaddell by Level 1
  • 8777 Views
  • 8 replies
  • 0 Helpful votes

I have a switch connected to the other 2 that form a core.VLAN 306 is created in the 3 switchs (level 2) and allowed their passage through the trunks. The configurations are identical on both sides of the trunk. The confiuración the VTP is identical ...

slandeira by Level 1
  • 2127 Views
  • 15 replies
  • 0 Helpful votes

HiSuppose if a new link is added in an existing STP switched network.  Does TCN is generated?  If not, then how all switches learn the new link.  Or even the same switch, which might have a different root port, but after adding the new link, it could...

cwet by Level 1
  • 1349 Views
  • 3 replies
  • 0 Helpful votes

Hi all,I have 2950t switch and it has 1 vlan.right now i have this under vlan 1no ip route-cachemy question is should i enable it under vlan1 or not?what are its advantages?many thanksmahesh

mahesh18 by Level 6
  • 5845 Views
  • 6 replies
  • 0 Helpful votes