Switching

Sir,I have a 2811 router; I want to configure this router as a ISDN RAS, I want to put this router on the boarder of the network, I have some client, who will dial this router through ISDN for accessing network and video conferencing purpose when the...

Hi all. Have been having some one way audio lately...hard to track down. Anyways, I set up a free software package called "OrkAudio" that records the conversations from the phones on the network (for Police and Fire). When I set up the required VL...

I'm trying to configure a L2L IPSEC VPN between a Cisco 7200 router and a Microsoft ISA Server 2006 with service pack 1.The VPN is up and running but every 2 hr the isakmp goes down for a few minutes (2 or 3). We changed the lifetimes (matching both ...

HiI'm having a problem understanding how to assign an ip address to a switch ethernet interface (6509). I could do the config in two ways i.e:Method 1:conf tinterface Vlan 10ip address 10.50.1.20 255.255.255.0exitinterface gigabitethernet 1/46switchp...

Hi GuysI have had spanning tree loops on my network on two occasion in the past one month, and I am suspecting its one on my WAN links that is causing it.CAN I ENABLE UDLD ON THESE TRUNK PORTS?cheers

Using a current 2950, and replacing with a 3750G POE-with an additional 3950G as a back-up (stack) is there a configuration sheet that will give me a step-by-step CLI so I can configure the new switch with my current 2950 configuration?

Hi - i have problem whith my asa.Early i have 1 exchange server in our company and i configured asa with next:static (inside,outside) xxx.xxx.xxx.102 192.168.0.23 netmask 255.255.255.255access-list outside_in extended permit tcp any host xxx.xxx.xxx....

I have two cisco 4948 switches. First switch is Connected to master firewall and the second switch connected to the backup firewall.these two switches are inerconnected using a trunk port.On first switch Loadbalacer1 is connected and to the second s...

Hi,we are using cat0s (8.1)in 6500 switch in that i have seen one console (enable)for configuring switching and the router console for the routing and configuring the VLAN interface in that i have created a three VLAN for ex: 107(10.107.0.0/16) 108 (...

I want to know how many routes which are to same destination but with different next hop can be supported in Cisco 3560G Switch.And can traffic be balanced among these routes?

Hi,i want to update a 6513, where an IOS Package "Enterprise LAN Only(s72033-ps-mz.122-18.SXD3.bin)" works. Which is the appropriate package? Enterprise Base?