Switching

Hi All,The Cat6513 with 2 Supervisor engine 720, has an issue with boot string configuration, Please refer the following output. (show dianostic sanity) 6513-01#show diagnostic sanityPinging default gateway 192.168.30.1Type escape sequence to abort.S...

Hi all, I'm planning to migrate our core/distribution to VSS. Also i need to migrate also our FWSM to VSS.. Does anyone already done this? Can someone please give me an idea on what will be the impact to FWSM after migrating to VSS. Would appreciate...

We have been recommended to sync our networking-equipment to one of our Dc's (not the PDCEmulator itself).However my boss has stated that our DC's has plenty of workload, and furthermore that our PDC synchronizes against a public pool of DNS-stratum-...

Hi,I have Two sites connected via 3LinksSite(A)========Link1========Site(B) 5MBSite(A)========Link2========Site(B) 2MBSite(A)========Link3========Site(B) 8MBEach link is terminated as VLANSiteAInterface VLAN9IP address 10.1.1.2 255.255.255.252Site BI...

I downloaded SDM to help me configure a site to site vpn. I tried loading versions:25241232Basicly everything on the download page. I get:"The router model is unsupported by SDM"Can I not use SDM with my router?Cisco 2621 <---no it is not XMc2600...

Versus a "no shut" how do you do reset of a VPN connection?

This holddown processs is not clear, all sources contradict between themselves and with the tests I performed in GNS3/Dynamips:R1<->R2<->R3<->R4<->R1(so 4 routers in ring)and set 1.0.0.0/8 on R1-R2, 2.0.0.0/8 on R2-R3, 3.0.0.0/8 on R3-R4, 4.0.0.0/8 o...

We have 2 x cisco 6500 switches running as a core switches, recently one of the core failed and the other took over.. but this was not the issue.The issue is we have a single DHCP server which was connected to the core which failed and hence there wa...

Hi, I'm using the document High Availability Campus Network Design Routed Access Layer Using EIGRP or OSPF (http://www.cisco.com/en/US/docs/solutions/Enterprise/Campus/routed-ex.html)to design a new building to an existing network (3 buildings). ...

Please see the attached diagram from one of cisco traing videos My question is if we do traceroute from router R1 to user IP 192.168.10.50 it goes to router R2 fa0/0 interface as next hop which has IP 192.168.1.2 but not to users default gateway...

Dear allI want some help regarding my firewall configuration. In our main office we have one Internet leased line, which is connected to router, and from router to ASA 5510.Then it is distributed to our lan. Our office LAN has the IP 192.168.0.0/24.I...

I having cisco router(2600) with 2 serial interfaces. One interace s0/0 connected to 2 mpbs internet leased line and aother interface s0/1 connected to another 2 mbps internet line . Totally i m having 4 mpbs internet leased line. One interface fre...

Well are new 4506 with a sup 6 arrived this week. I was trying to configure PBR on it and it kept rejecting the command. This is a replacement switch. The other 4506 has a sup 4. I started looking on cisco's site and "PBR is not supported on Supervis...