Switching

Is there any commands to forward the traffic comming from one interface to the other ?The switch I am using is a Layer-2 4506 device..and I can not enable the routeing...Thanks in advance.

Hi,For BSCI I'm studying with dynamips+gns3 software with very good progress. As I near to the exam date for BSCI I begin to worry about which software I can use to study for BCMSN. Is there any I can use for switching simulation? I don't have enough...

Hi,um, how can I ask to you...I just explain our problem first.We are using 7200 VXR for PDSN but this router caused reloaded by himself.This is message,"System was restarted by error - a Software forced crash, PC 0x60A00A04" and the IOS version is "...

How do I take a switch out of a stack? Also, if i take it out of stack, will everything on the network be operational still? Even on the switch I removed? Its a master switch too!HELP!!!

Hello all,During an IOS upgrade the IOS was installed in a sub-directory - flash:/flash/c2950-i6k2l2q4-mz.121-22.EA11.bin. I don't know how. Upon rebooting the switch boots up to switch: prompt and I have to manually point to the IOS command boot fla...

I need the information about the bug: CSCdj51693. Why is it no long available? Please send me the entire content of it.

Hi,I have a cisco 877 route for guest access, not many people use it, but I have a DHCP scope of 10.0.0.0/24 and instead of giving users an IP of 10.0.0.2-3-4 etc they will get 10.0.0.185-190 etc.What can I do?

Does Windows XP Home Edition have an Echo port, or is there a way to set up an Echo port?

Can anyone tell me what the advantages and disadvantages of enabling storm control?Thanks!John

Hi All,I am planning to upgrade my Cisco Distribution switches using Cisco 3750E switches using stackwise technologyCost is the major consideration for us. So we are thinking of buying Dell Switches for the Access Layer, will there be a problem in in...

I need your help . I have 7600 seriers router which has redundant supervisor , on which if i do "write memory" i see following error messages in the Log , i have also checked nvram and found that startup config file size is 0 : Oct 2 12:19:22.563 ED...

I experienced a unique problem in one of the country LAN connection resided in A. basically the previous connection was like this. the primary and secondary router are connected to a device called NIPS(ISS proventia) - Network intrusion prevention sy...

Hi, I am trying to configure ospf on the network. I have collapsed core design, users are connected to the 4500 switch and servers are connected to 3750 switches. 4500 switch is connected to the two 6500 switch via Layer3 and 3750 switches are connec...