Switching

Hi,Appreciate help on the following boot up error:Boot Sector Filesystem (bs) installed, fsid: 3done.Loading "flash:c3750-ipbasek9-mz.122-25.SEE2.bin"...flash:c3750-ipbasek9-mz.122-25.SEE2.bin: no such file or directoryError loading "flash:c3750-ipba...

HI,I have Sup-2 in slot 1 and 2 with active and standby in 6509 NEB-A chassis.Now, if i replace sup-2 with sup720 i have to put in slot 5 and 6 where i have some line cards. Can some body help me to understand why sup720 need to be put in slot 5 and ...

We have 6 sets of stacked (2) 3750's that have seemed to all have a memory leak/problem. Not sure if the error occurred all at the same time, but we noticed the problem when CWSI couldn't contact them anymore on a scheduled inventory collection. Thes...

I'm trying to police traffic from a source to 1.5mbps going out of a gig port on a 6509 sup720 IOS 2.2(18)SXE.Here is the class map and policy map:class-map match-any DVR match access-group 130!!policy-map DVR-test class DVR police cir 1544000 bc...

Hi,Sorry if it is not the best place to this thread.I have one client with the Public IP Address range for their WebServers:aaa.bbb.141.112 /28They ask for more 16 ip's to the provider, and it was given the following range:aaa.bbb.140.112 /28I had co...

I would like to know is there is any IOS version which support VLAN creation and IP-SEC cypto map.Thanks in advance

Hi AllDo we need to add patches to the Cisco Switches and Routers? Where do I get these patches?We have s mixture of Cat 6509, 4003 and 4006 running at 12.2.18 and 6.4.10 respectively. We ran a program that looks for vulnerability and it bought out a...

can we have 2 or more VLAN's in the same LAN on the same subnet. I have to design vlan for my organisation. I have trouble in desinging the vlan for the same

Is it possible to make sure the top Supervisor Engine (1a in my case) is the Active module after a box reload always?The box is running in Native mode here.

I have a client who wants their entire network infrastructure revamped. We're going to have fiber runs connecting the buildings, and we're going to upgrade the entire network to gigabit.What would be the best Cisco solution? I'm looking for48 port gi...

We need to configure a mac filter on a bunch of the cisco 2950 switches to allow only certain devices in. Short of manually doing it, has anybody done this in a more efficient way?thanks

I have an assignment to design two networks for two different offices which will have different Internet gateways, VPN networks and different LAN users having there own routers and switches. But the two different offices will have common proxy serve...

I have a switch thats connected to the internet via an ethernet connection, i want to limit 2 subnets to a download speed of 10MB...this is what i haveclass-map match-all Test match access-group 150!!policy-map DOWNLOAD class Test police 1000000...