Hello,
A WS-C3560V2-24TS-S Switch shows the following output after an unplanned shut down due to electrical issue:
PLACEHOLDER HOSTNAME#sh env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 38 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 56 Degree Celsius
Red Threshold : 66 Degree Celsius
SW PID Serial# Status Sys Pwr PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
1 Built-in Unavail
SW Status RPS Name RPS Serial# RPS Port#
-- ------------- ---------------- ----------- ---------
1 <> <>
The Internal PSU is in Unavail state but from the output no RPS is installed, so it must be a fake alarm. At least that's what i think.
In other posts i see that this could be caused by a switchover to the RPS, but in this case i don't see any,
How could it be that the switch is still powered on?
Maybe it's just a cosmetic bug or could this be a true issue down the line?
Switch is running: c3560-ipbasek9-mz.122-50.SE1
Those are the community posts i have seen before posting myself, but the problem described is slightly different:
https://community.cisco.com/t5/switching/power-supply-error-cisco-switch-3750/td-p/1878097
https://community.cisco.com/t5/switching/internal-power-supply-is-declared-unavailable-when-the-3750g/td-p/2229985@