cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
76792
Views
20
Helpful
12
Replies

Looking for good Logical Visio stencils for Nexus

adil.nasser3
Level 1
Level 1

Hello,

I have been searching the web for decent logical visio stencils, especially for Nexus switches.  Can yo someone provide a link for downloading them?

Adil

12 Replies 12

Not applicable

Hi Adil ,

                 Have you tried Visiocafe . I normally find most of the stencils i need there..

Hope that helps

Aziz ur Rehman

Enterprise Network Engineer

Securetech L.L.C UAE

-

Jerry Ye
Cisco Employee
Cisco Employee

You can try this link:

http://www.cisco.com/web/about/ac50/ac47/2.html

HTH,

jerry

Phillipdup
Level 1
Level 1

Hi, I found

http://www.cisco.com/c/en/us/products/visio-stencil-listing.html

to be very useful.

Phillip

Oerlikon_NZ
Level 1
Level 1

Sorry to Dredge up an old thread, but I too have been looking for a decent set of 'logical' Nexus visio stencils.

I've tried the links above & visio cafe, but all I could find was rack type nexus chassis stencils, & a logical diagram for Nexus 1V & 5K

Where can I find logical nexus viso stencils like in the attached pic?

Have you looked at http://www.cisco.com/web/about/ac50/ac47/2.html

Don't know about the visio files, but the power point file has Nexus 7K etc

 

RedNectar

RedNectar aka Chris Welsh.
Forum Tips: 1. Paste images inline - don't attach. 2. Always mark helpful and correct answers, it helps others find what they need.

Thanks.

The power point files didn't really have what I wanted.

I ended up downloading http://www.cisco.com/web/about/ac50/ac47/3015_eps.zip, opened the Nexus 7000.eps file in Word (as it wouldn't open in Visio), enlarged it, copied to to MS Paint, trimmed it up, saved the image as .png & inserted as a 'picture' into Visio .  What a complete faff, but it's what I wanted in the end.  *shrug*

Again, unless I missing something, it would be good if Cisco could add all the Nexus to their logical visio stencil file.

You can find the Nexus logical icons and more in the attached power point. All you have do it ..it's copy it and paste it into Visio..whatever icon you need. I hope this helps.

Thank you so much. This is pretty good!

Please rate all useful posts

FlorianCokl
Level 1
Level 1

And - 5k & 2k

FlorianCokl
Level 1
Level 1

Here's one I've created with GIMP only recently - for Nexus 7k.

With this png you can create your own stencil from within MS Visio.

Hope it fits your expectations?

Cheers

Florian

Hi All,

Try with this http://www.cisco.com/c/en/us/products/visio-stencil-listing.html

Regards.

Jorge

Review Cisco Networking for a $25 gift card