Problem with Link Aggregation Sg350 and Synology NAS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-14-2022 01:33 PM
I've created the bond on the NAS. But after I configure the switch the NAS locks up. At one point I see is "Failed To Establish ieee 802.3ad connection." Removing the LAG gets the NAS back online. I made sure LACP was enabled and the correct ports were selected on the switch. The NAS and PC are on the same VLAN. I tried enabling the VLAN option on the NAS but that completely locked it up and forced me to reset the box. Wondering if anyone else had issues with a Synology (1522+) NAS and a Cisco SG350 switch.
- Labels:
-
Other Switches
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-14-2022 07:00 PM
At one point I see is "Failed To Establish ieee 802.3ad connection."
seems like configurations are not done properly from NAS or switch. check below links.
https://www.youtube.com/watch?v=SyRF7_QdsBk&ab_channel=LawrenceSystems
Good luck
KB
