Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...
Forum Posts
Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...
Hello,I am connecting Cisco Nexus N9K-C93180YC-FX3 with Dell EMEA_S5224_ON (SONiC OS). Dell switch Port is 1x100G (configured Breakout on Dell Switch) (Port channel configured on 1x100G port)Cisco Nexus Ports are Eth1/41-to-E1/44 (4x25G) ...
We are in the process of upgrading a VPC pair of N7K's and have one upgraded and moving on to the second. We are trying to isolate the second switch to upgrade it, and part of that would be shutting down the peer-link and KA. I can't find an official...
Resolved! Portfast edge in IE 3000
Sorry if this is a stupid question, but...I've been using IE2000's in an application, and as those aren't available any longer, my company has switched to IE3000 switches.I was putting the file for one of my IE2000's into the 3000 and it told me that...
Hello Pros, I wanted to add Time Stamp on my 9200 Switch to the Syslog Backup server, if any one make change on the switch every time/any time. My management can see. We are using Unix backup server and we can see any change. But it does not show th...
Hi Cisco Team, I have an cisco switch WS-3650-48PD with version 16.3.1with Switch Image CAT3K_CAA_UNIVERSALK9..Please let me know the stable version is this stable ?
Hi All,I have the following issue, and it would be great if you could provide some ideas on this. we have voice handsets and currently connecting to 3rd party switch --->checkpoint fw --- connecting to LAN switch (sw2 Trusted network).Recently we are...
Does anyone know of an Android App which can capture CDP or LLDP packets? Preferably free and does not require to root the phone.
The log content that occurs in real time is as follows. 2025 Oct 15 14:14:00.131 SD_PAY_EDGO_L3_NX93180_N1 %KERN-2-SYSTEM_MSG: [23131887.658159] EXT4-fs error (device sda2): ext4_read_inode_bitmap:200: comm plog_sup: Cannot read inode bitmap - block_...
Hi I need commands to configure a 9300 switch in front of ISE with 802.1x Thanks
Resolved! Updated list of Cisco-brand USB drives?
Hello all,Referencing Solved: Cisco usb thumb drives - Cisco Community , the given list of USB drives all seem to now be "old" and no longer offered (can buy RF (remanufactured) only):N7K-USB-8GB (Nexus 7K USB Flash Memory, 8 Gb) - ONLY OFFERED NOW A...
Hello cisco community, I'm reaching out because I have at this point spent about 24 hrs worth of troubleshooting. So I have a Catalyst 3850 set up with VLAN 30 and its corresponding DHCP pool. Ports are set up for VLAN30 access and portfast, client s...
hi.i have a nexus 3064pq.when switch reload or power on/off startup-configuration is empty .the full boot log is here :Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.Press <DEL> or <F2> to enter setup.Sysconf checksum failed expected;...
We have noticed that our ESS9300 Embedded Series Switches have erratic behavior for the LEDs at power up. We use other Cisco products (ESS3300, ESR6300) that do not exhibit this behavior. The behavior seems to change once the unit has fully booted. I...
Hi all,I need some help if there is any possibility to create L2 trunking on a switch WS-3560X-48T-L, according to a manual found this feature is not available for this LAN base switch saying "IEEE 802.1Q and Layer 2 protocol tunneling are not suppor...
