Hi there,I'm deploying a CMS Cluster but before starting deployment phase i need tp know the Network Requirements for the cluster to be fully operational and stable such as ( B.W, Port Speed, etc ... )i searched the web and found nothing, if you coul...
Forum Posts
Resolved! QoS for VOIP/Video help
We run video and VOIP in our network but I am unsure if our QoS is working correctly. I have done some research but when I show our service policy output, we are only getting matches on "0" and "6" .....from what I read on wiki: https://en.wikipedia...
Cisco TelePresence 3000 displays video on one screen only when a meeting is conducted between it and an endpoint with two screens like cisco webex room kit but when it is connected to a room with 3 screens all video is shown on all the three screens....
When users book meeting using outlook inviting endpoints meeting is scheduled but webex is not integrated
Cisco EX 60 Video End Point - "Lost Connection with control device, I have reset the EX60 to Factory Defaults and Still the DV8 control device will not connect.
Resolved! Quad Camera - Video from internal camera
System Diagnostics reporting: ERROR: Video From Internal CameraThe internal camera is not transmitting video I have several systems reporting this. The software is at CE 9.7.1 Any suggestions?
Resolved! Cisco VCS restore backup
Hello, I want to migrate VCS appliance to VM. I want to know when I restore the backup the server certificate will be restored or not. Thanks in AdvanceOmar Gamil
Anyone can tell me why my button action is not working for this macro code ? I have added a button with Id 'callCatering' and added this macro. But I keep pressing that button which I have created in UI Extensions configuration. But no call is coming...
i have some question .1 any migration of VCS to Expressway-C from Cisco? if yes the can i install Expressway-C option key to my existing VCS??
Running the Webex Room Kit Plus w/firmware Ce9.8.1. Getting a warning: No Camera FoundMake sure the camera control cable between the camera and the system is connected. The system is functional but getting a firmware text comment that camera needs fi...
Hello, We are configuring locally hosted branding for CMS following the detailed procedure produced by CISCO but it doens't work. Is there any place in the API's where i have to indicate that the branding files are locally hosted instead of configur...
Hello All, just starting out working with Macros but can't seem to get the button event correct. Here's the XML:<Extensions> <Version>1.5</Version> <Panel> <PanelId>CallMeetingPanelID</PanelId> <Type>Home</Type> <Icon>Language</Icon> ...
hi all, is anyone else out there experiencing this error when adding video system to TMS from CUCM that have been configured via Prime or by another means through AXL ? The only fix I can see is going back to the admin password in cucm and manually e...
CMS not registering as CFB on the CUCM for ad-hoc VC calls. CUCM Ver: 12 CMS ver : 2.4 Secure SIP trunk working fine with calls. Using Private CA to sign all the certificates, no certificate errors when using FQDN to access CMS from browser. Using...
Cisco has release CE9.8.0 release which now supports the Webex Board series for registration on CUCM.In the release notes it is indicated how to convert Board but after the factory reset I still cannot get access to the admin page of the board. I con...
