I have an issue with a few SX80 have been installed and they drop calls only when it's an audio call and only sometimes. In the past I would have scheduled a few calls after hours and simply capture them all using a syslog over an SSH session to the ...
Labels
-
3PCC
(1) -
ASA
(1) -
Buying Recommendation
(36) -
Cisco Bugs
(1) -
Cisco Cafe
(14) -
Cisco Proximity
(1) -
Collaboration
(2) -
Collaboration Endpoints
(9) -
Collaboration Solutions
(4) -
Community Feedback Forum
(8) -
Community Ideas
(3) -
Conferencing
(1,887) -
CUCM
(2) -
Desk Endpoints
(227) -
Feature Idea
(1) -
General
(1) -
how to order
(1) -
IP Phone and Accessories
(1) -
Optical Networking
(1) -
Other
(4) -
Other Advanced Threats
(1) -
Other Collaboration Applications
(4) -
Other Collaboration Endpoints
(1,818) -
Other Collaboration Topics
(4) -
Other Network Security Topics
(1) -
Other Security Topics
(1) -
Other Switching
(1) -
other topics
(1) -
Other Unified Communications
(2) -
Other Unified Computing System
(1) -
Other Webex Topics
(3) -
Peripherals
(311) -
Platform
(1) -
Room Endpoints
(15,769) -
Security
(1) -
Security Management
(1) -
Small Business Voice and Conferencing
(2) -
SX80
(1) -
TelePresence
(4) -
UC Applications
(5) -
Unified Communications
(2) -
Unified Computing System (UCS)
(1) -
Video
(2) -
Video Conferencing
(7) -
Video Connection
(2) -
Video devices
(1) -
Video Over IP
(1) -
Voz IP
(2) -
Webcam
(1) -
Webex Control Hub
(1) -
Webex Devices
(7) -
Webex Meetings
(8) -
Webex Teams
(1) -
Webex Topics and Jabber
(1) -
Workflows
(1)
- « Previous « Previous
- Next » Next »
Forum Posts
Hello,I have one SX20 with a internal IP Address and a public ip configured with NAT, when i call a external video the other user see my internal IP.How can i show only my public IP.RegardsLeonardo Santana
Resolved! Can't add VCS Expressway to TMS
I'm trying to add the VCS Expressway to TMS. When I add, TMS attempts connecting through the various protocols. Then, it errors and the screen refreshes pretty quickly, and I can't see what happened.Where do I go to look to determine what happened?...
Resolved! Cisco TelePresence Table Microphone 20
Hello,What is the coverage of Cisco TelePresence Table Microphone 20?It is omnidirectional or unidirectional?RegardsLeonardo Santana
Hi,Let's assume that I've got an SX80 codec with PrecisionHD 1080p4x S2. The camera has a custom video/control connector but can be used with SX80 codec via the HDMI/RJ45 adapter. The camera is connected to the D-SUB 9 port on the codec and I know th...
Resolved! Point to Point Video Call - SX20
All,If I have 2 x SX20 endpoints registered in the same UCM cluster and accessible via the internal network with no firewall traversal, do I need any additional license (They both have room licenses) to establish a point to point video call?The licen...
Hi All,TMS 14.3.2 (although the issue has been around on different versions)We have been having a slight issue for ages with TMS where it is issuing email warnings about a failure to update a Phone Book Source based on a Gatekeeper (mainly VCS, but s...
Resolved! Operating system for MSE blades
Hello,What's the operating system for the MSE 8510, 8050, 8321?Is it the same as CTS (SX80, C60, VCS, etc) using Linux operating system? Thanks in Advance, Lan
Hi Experts, Is it possible to do content sharing between Endpoint registered on VCS and a Lync user ? Lync version - 2013VCS - 8.2 ThanksManish
Hi Cisco support, I have some issue for video conference camera, IR is not working. Check attached file for your reference. PID: CTS-PHD-1080P12XS Part No: 800-34904 B0 Serial No: A1AB07E00881 Model No: TANDBERG TTC8-02
HiI am planning to connect three monitors to my C-90 codec and i want to dedicate each monitor for selfview, farend view and presentation respectively...is it possible??if yes, how????
Hi all, I planning for deployment of MRA , B2B set up using Expressway E and C. In order to have redundancy in place, I am looking to form cluster of two nodes Expressway e as well as Expressway C.Here I wanted to understand, does this require additi...
Resolved! ISDN Gateway without VCS control
Hi team,We have a Cisco CUCM v 10.5 deployed and all voice and video endpoints registered to CUCM only, Now I want to integrate Cisco ISDN GW 3241 with CUCM, is it possible ?? ( like the way we add voice gateway ) or will the ISDN GW work stand alone...
Hi, a couple off problems during upgrading my endpoint - hop you can help.1. Uploading the release key with succes2. Starting upgrade from TC5... to TC7.3.3 - succes3. after several minutes off installing extracting .... System reboots with this mess...
Hi ThereWe have been using the SX20 for over a year now. Until recently everything was fine. However on a recent inspection we have noticed that the system has frozen. The system appears to boot correctly until the user interface appears after tha...
