Hi,I want to upgrade C20's 6.3.0 version. (now 4.1)i was try to upgrade but it seems message the "dead request"Install file is "s52000tc6_3_0.pkg".Is it possible to upgrade from 4.1 to 6.3 direct ?And how to resolution that problem ?Thanks,Jong woo.
Hi,I have configured some AM GW 3610 (1.1.34) with VCS control x7.2.2 (findme) and Lync 2010, but right now everytime a Lync user places a call to another Lync user AM GW transcoding resources are used and I can see up to 8 or 9 active calls to same ...
Hi,I am going to configure a AM GW 3610 but in Lync 2010 infraestructure there is not a "director" server, config. manual says that OCS/lync signaling destination address field should be a director server, which lync server should I configure with?Th...
We have a remote codec (C60) that is registered to our VCS-E via H460 and oddly enough the registration address is A.B.C.D:33060 and not A.B.C.D:1719. Port 33060 is not even open on our firewall, thus clearly the codec is registering via RAS (UDP-17...
Hi Folks,I have an EX60 that looks as it is having an early boot error. The amber light blinks at power up, the Cisco logo does not appear and it fails before a DHCP address can be assigned to the unit. I have factory defaulted the unit with no luc...
Have a question for anyone that has a TCS and configured for domain login/authentication.Our TCS is configured to authenticate to AD, which works just fine. When users login to the website, they have to put the domain short name in front of their us...
HiI see a scheduled conference in my Telepresence server stuck in "Delete Pending Disconnect Completion". Numeric id 1234567TMS updated the CCC logs as Meeting Release on Port X.From VCS we were able to see a Call leg from our ISDN GW was active towa...
HiWe have got VCS and we working with the jabber for the dektop fine.But now we like to worl with jabber to phones : android and iphone...Can we do it? Which app we need to download: jabber voice, jabber cisco ??Which creidnaitials we need to insert ...
Hi ExpertsOur setup is we have VCSc&e,TMS,Conductor and two 7010 TIP servers. TIP server managed by conductorWe trying to join our client MCU bridge from our MCU the problem is we are not able to send DTMF signal.In briefOur client MCU is in Public I...
Hi,I know that Pipe is restriction bandwith under a link ,e.g if a have a pipe = 768kb from subzone1 to default subzone. and i have subzone 2 pipe =512kb and i have totalbandwidth available under subzone2 =384kb, and make a first call of 384kb , and...
Looking at the documentation has not helped.The media blade has 4 network interfaces A - D.In the web configuration, I can see ports A and B, so I am assuming that C and D are for future use.Now can I have port A on my internal network and port B on ...
Hi,I have just deployed TMS 13.2.2 and have added some Polycom HDX's to TMS. The HDX's are in TMS ok however, when I apply the phonebook from TMS to the HDX it can not be seem on the HDX. The HDX has TMS listed as its management server and it has t...
Hi,Now that TMS 14.1 has been released and the "Cisco TelePresence Conductor with Cisco TMS Deployment Guide" does not appear to be available as of yet; i'd be interested to hear what production/lab experiences people have had so far?Does anyone know...
I am migrating TMS to a new server and need to change the IP address and hostname of the server it resides on. The TMS server is NAT'd so that external endpoints can communicate to TMS.In regards to the currently installed internal certificate, do I ...
