MX800 Screen Issues
We have a Cisco MX800 which has developed a screen fault, it went intermittently and has now gone as per attached image.Anyone got any spares...
We have a Cisco MX800 which has developed a screen fault, it went intermittently and has now gone as per attached image.Anyone got any spares...
Recently I deployed a cluster of 6 call Bridges for three sites. Each site has two call bridges deployed. Site 1 and Site 2 has the Cisco Expressway as Edge solution. Site 3 does not have an EDGE solution. My question, can we deploy a CMS Edge soluti...
Hello everyone, I'd like to know if there's a way to register a room kit such as: Webex room kit mini, Webex Room kit Plus, TP SX20, SX10, etc.... to CUCM Server using SIP and call from endpoint to Zoom or Webex calls. Today, i have a customer that r...
The audio loop delay detected is at least: 190 ms. There seems to be an audio delay introduced by the external equipment connected to the TelePresence device. This may reduce the quality of your TelePresence experience. Example: If an output TV/monit...
Which was the last software of the DX80 that supported google play apps?Is there any way i could download google play apps and use them in them in the dx80, or some workaround to make it work..?
Hello - with the changes to Expressway X14.2 you now are required to have the ECDSA certificates signed. We ran into this because we upgraded from x14.0.7 to X14.2.2 and the neighbor zones would not come up because of self signed certificates. The ...
In my deployment of a clustered Cisco Meeting Server with external web server hosted branding, users complain they are not hearing the "welcome" or "you are the only participant " messages with cisco meeting web app or like "enter your pin" with Cis...
HelloThere is a main CMS and CMM servers in local network. All internal WebRTC calls work correct.I'm trying to set up an Edge Server for external WebRTC. I configured Webbridge3 and Turn services on the Edge server and C2W on the main server. When I...
Hi all, Need some help with my TTC7-25 codec. When switched on , white led blinks 4 times and dies. When white led blinks , the network ports from the back blinks too.If i press the reset button from the back for 10 secs , white led starts blinking ...
Hi AllRecently we have deployed Expressway C and E managed to get MRA to work completely fineBut after that we have to change the Expressway E IP address and now the IM&P service and directory is working fine but phone service is not registering. Tr...
Hello All,I have a large high-end meeting room with 30 chairs (as shown in attached Riser Diagram) where it was installed a CTS-SX80-IP60 along with CTS-PHD-1080P and LIC-SX80-MS with a Touch 10.However, i am not really sure about the full functional...
I recently deployed 6 callbridges and 5 database nodes of Cisco Meeting Sever. One CallBridge displays in the Configuration > Cluster, the status of "Connection attempted" to other callbridges, while in the Event Log, I seen the connection from this ...
I'm trying to enable cms recording on version 3.4I ran the commandrecorder> pki csr recorder CN:recorder.mxc-cmspod1.lab It created the key file recorder.key and CSR recorder.csr I can see them in sftpnext i ran recorder> recorder sip listen a 5060 5...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/725/fn72543.html M.
Hello,I have the problem that I don't have the option "WakeupAtMeetingStart" on my 3 devices (Room Kit Mini, Room Kit and Room Bar), all running on RoomOS 11.0.1.9 adc13d8cb42.do I have to set something else?Thanks,Michael
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-22-2023 06:00 AM | ||
03-20-2023 07:26 AM | ||
03-05-2023 02:01 AM | ||
02-28-2023 01:07 PM | ||
02-24-2023 12:09 AM |
User | Count |
---|---|
2 | |
2 | |
1 | |
1 | |
1 |