04-06-2011 07:36 AM - edited 03-19-2019 02:41 AM
I need to know when I delete a voicemail in my inbox, my cisco 7942 still has my voicemail and the light is still lit up. However, when I listen to my VM on my physical phone and delete the message, my VM on the inbox is simultaneously removed. Any fix for this.?
04-06-2011 10:22 AM
How long have you waited? Unity Connection periodically polls the EWS interface. When I was beta testing this it was taking 40-60 seconds for the change to be replicated back into Unity Connection.
The troubleshooting guide has some guidence on this:
Deleting a Message in Outlook Does Not Delete the Corresponding Message in Cisco Unity Connection 8.5 and Later: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/troubleshooting/guide/8xcuctsg038.html#wp1083229
Single Inbox Synchronization from Exchange Is Delayed: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/troubleshooting/guide/8xcuctsg038.html#wp1079514
If you find that it is a consistant delay you should read through this section of the design guide. In some circumstances it is necessary to adjust the quantity of threads that are attached to the EWS interface. Be careful; this can quickly have an impact on the Exchange server's performance.
Calculating the Number of Connections for One Connection Server: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg032.html#wp1132149
04-06-2011 09:23 PM
Is this UNITY or UNITY CONNECTION? Please specify version and product...note that Unity and CUC are very different.
Hailey
04-07-2011 06:28 AM
David,
It's Unity Connection 8.5.
04-07-2011 06:30 AM
Jonathan,
I've waited for a long period of time. I still have my VM on my phone when I deleted my VM on my inbox yesterday.
12-04-2011 08:49 AM
Was there any solution to this post?
-Matt
04-07-2011 08:31 AM
I had a case like this the other day. Try restarting the Jetty service on CUC and see if that fixes this up for you. It's part of the troubleshooting guide already mentioned to check the Jetty service but it never says to restart it and I have had this help when TUI deletion works fine with MWI but deleting or reading messages from outlook doesn't turn it off.
Thanks!
Tray
04-07-2011 08:58 AM
All,
We restarted jetty service but to no avail. We also forced resynchronization but problem still persists. We performed traces and most of the errors are coming from exchange and these errors on the unity are related to the service acct and impersonation rights. At this point we are going to try to create a new service account and deleting the current one.
CsEws,10,[CsEws/CsEwsClient.cpp:471]: HTTP request failed with error: Bad response from server, HTTP code returned: 500, HTTP status code: 500, for ews URL: https://ex2010.xxxx.com, verb: POST
CsEws,10,FAILED HTTP Response:
11-14-2011 04:50 AM
Have you solved this issue or some one could help please cuz i'm facing the same error when integrating with Exchange
2007 SP1 , when doing test from user unified messaging account it gives the below error.and can't find reasons for
500 on troubleshooting guide.
Failed accessing user@xx.com on xx.xx.xx.xx | Some possible reasons for 500: Server configuration problem. Incorrect authentication mode. Internet Information Service is unavailable. Email address (primary SMTP address) not found. |
11-05-2012 08:45 AM
OSAMA,
were you able to resolve this by chance? im encountering the same issue.
thanks
11-27-2012 08:09 AM
Hello,
any news about this issue?
I'm facing the same problem.....
thanks
Paulo Ferreira
05-14-2013 07:00 AM
any one had any luck fixing the "Some possible reasons for 500 : Server configuration problem. Incorrect authentication mode. Internet Information Service is unavailable. Email address (primary SMTP address) not found." issue when integrating UC with exchange 2010??
thanks
vijay
05-31-2013 03:28 PM
Have any of the 29 people that inquired about this issue resolved it? : )
I'm having the same problem.
TIA,
Amir
07-12-2013 11:18 AM
any luck with anything that fixed this issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide