Hi,I am attempting to apply the specified patches to UCS servers. Can I download them directly from the VMware site and apply them as I would with any other ESXi patches, or is there a specific custom build for Cisco?ESXi 5.0 / 5.1 / 5.5 / 6.0 VMSA-...
Forum Posts
We recently deployed UCSC 2.0(1t) to evaluate as we haven't been satisfied with Intersight up to this point. I recall seeing some information while evaluating that "Some features require a valid license after the evaluation period" (or something to t...
Resolved! HUU m5 4.2.3 - extracting firmware
I wanted to manually upgrade the cimc and bios for a remote m5 server (actually a L3 APIC). IN the past, you could mount the huu~iso and extract the bios and the cimc firmware with a GETFW tool included on the HUU disk. I just downloaded ucs-c220m5-h...
We had similar issues Reported.We had Fabric A and Fabric B which has MDs 9710 on each side. FI-A is connected A side MDS and Fi-B is connected B Side MDs.On A side we had 5 members of Port channel out of 6 Ports went offline. This has caused due to ...
Hi All,is there a way to simulate the state link down of one Vhba in my service profile?In my environment I can't remove the FC uplink cause more then one service profile are pinned in port.Thanks!
How to Migrate service profile from UCS 6200 to 6400/6500 FI.is there a script we can migrate the service profile, pools, policies to new FI. this new FI will run parallelly to the existing FI.we want to migrate one blade at a time.
Hi alli am planning to upgrade UCS Infra 4.1---4.1.3h----4.2.3once i am upgraded infra through above path can i upgrade b and C host firmwares direct without going to intermediate ?
Hello, I have a UCS 6200 that is in a bad configuration state. It needs to be wiped.Both FI's boot as secondary and don't permit login.I'd like to just wipe the configuration but all of the documentation I've found requires access to nxos.Is there a...
Hi, all. Installed Server 2022 on one of my C240 M5s and it's missing a PCI Device driver. I downloaded Cisco's most recent Drivers ISO for Windows, but it doesn't seem to have it. Any thoughts on how to identify what's missing?Thank you.
VMware 7 running on UCS-E180D M3 , cannot get the internal nics online, they are Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet running the latest vmware U3 NTG3 driver , belowntg3 version 4.1.9.0-4vmwThe crazy thing is that the information ...
Hello guys,I'm trying to configure UCS-C240-M7 server in Cisco ccw. I'm getting the following error after configuring, Please note that this product may not be purchased outside of the approved bundles. Please use MLB: UCS-M7-MLB. (CE202322)When I lo...
Resolved! Redhat 8.4 on UCS C220 M5 Rack Server
Hello,I can't update my Redhat 8.1 to 8.4 because the megasr module is not available for Redhat 8.4 !https://software.cisco.com/download/home/286318809/type/283853158/release/4.2(1c)Last month update gives only drivers for Redhat 8.2, is it a joke?An...
Resolved! UCS FI 6332 Unable to login.
Hello Community!I have a cluster of FI 6332 System version: 4.0(4n): A: UP, SUBORDINATEB: UP, PRIMARY And I have an error trying to ssh primary B or vip ip: Unable to login. You have reached the maximum allowed number of concurrent sessions. Please ...
Hi!I need to clear the cached SSH keys in my UCS enviroment. I have tried SSH to the Fabric Interconnect and connect to local-mgmt and thereafter issued the command "clear sshkey x.x.x.x". This yields an error message of "Permission denied" to the fi...
Hello. I have two retired UCS C3160 servers, each with a single M3 server node. I'd like to try upgrading one of the servers to a C3260 by moving parts from one C3160 to the other.That said, would it be possible for someone from Cisco to please answe...
