Unified Computing System Discussions

Hi Team,   My client  is recommending to connect each FI to both SAN switches ? but my concern is What is Cisco’s recommendation to connect FI to both SAN ? Device :- UCS5108   Please guide on it

Hello,   I'm upgrading the UCSM from 2.2(6c) to 2.2(8) version, but after download image to FIs, and then started install. The UCSM show me "pending activities" warning to reload primary FI, but when I clicked on restart now, both FIs and also all bl...

Hi All,I am planning to upgrade blade servers on Cisco UCS 5108 chassis from version 2.0(4a) to Release 2.1 but cannot upgrade them at the same time. Is it possible to run blades with different firmware version within the chassis? Can I still join th...

Hi Expert,   I tried to upgrade my UCS-C240M4 from 3.0(1d) to 3.0(4a) and it fails. Lucky, th UCS server stored a ESXI and all VM are running well.   The problem is, when I use HUU to upgrade it from 3.0(1d) to 3.0(4a), SAS expander upgrade fail. Onl...

While I've seen and read lots of posts (here and elsewhere online) that tell you how to configure LDAP(S) authentication with Active Directory to the UCSM, but I haven't found any posts where someone has configured LDAP(S) authentication with OpenLDA...

So I'm tracking on how the default VLAN 1 is allowed on all uplinks in Disjointed L2 Network configs, but what if VLAN 1 was not the default or Native VLAN on the UCS? What if we used a different Native VLAN and started tagging VLAN 1? Is the rule th...

I have 8 HX 240c M5's that won't power on. Plug them in, wait 10 minutes, hit the power button and nothing happens. I read that if they won't power on to plug them in to the FI UCS and power them on that way but how would it know it's there if it's ...

I've create a service profile and want to associate it to blade 3-8 of chassis 1. but somehow failed to do so. To do so i've create server pool as well but it's not working. Can we associate a single service profile to multiple servers?

We are using N6K, 2K and UCS240M4S in our network. I want to know know how to make network connection between N2K with model number N2K-C2248TP-E-1GE and UCS 240M4S. Do we need to form Trunk or Edge port between UCS and 2K ? We will be installing aro...