Unified Computing System Discussions

We had an instance where 4 out of six blades lost connectivity to 1 LUN. For some odd reason, this caused our ESXi hosts to become non-responsive although the VMs stayed up. The solution was to remap the LUN from our fibre storage array (Compellent) ...

I'm booting my Windows 2008 R2 from SAN and it works fine. The only way I have been able to have additional disk from the SAN is to include them in the  Boot Policy with a second vHBA. That does not seem right. What is the proper way to present addit...

Hi community, looking for some feedback on design options for directly connecting a NetApp array to UCS using FCoE storage ports.The NetApp is configured as a metrocluster and has the Unified Target Adapters. MDS switches are available for zoning.Loo...

I have 2 ESXi Host in UCS. I have problems accessing Guest consoles from vCenter. I appears port 902 and 903 is blocked. Any ideas?

Call home keeps spamming these errors. I don't believe there is anything wrong with power to this chassis. Running code level 1.4(3m) on everything. Thought this was a bug in the last code update, but it continues?System Name:UCS02-ATime of Event:201...

The necessary BIN files for the kickstart and system Nexus IOS are in the bootflash, but when I run the 'install all' command it comes back with an error message.  The error message is: 'Unable to send request to installer, give up.  Return code -1."...

We have the following Palo vNIC allocation for an ESXi host with 1000v in our vBlock: VLANs on vNIC #1: 14; 2: 413: 424 20,12,22,24; 5: 4,3,6Now the statement has been made to us that this would not provide a redundant networking configuration in the...

I have a UCS210 c m2... I have confogured switch for ether channel the way the student guide suggests.. When I configure esx for mulit vlans I have issues sometimes where I have to shut down on port on the switch to  get talking to the CIMC or to vsp...

Just wanted to know if anyone has idea of next release for UCSM.I am facing one configurational issue while Automating the UCS by the help of API. I observed that when I trying to change the Boot order for e.g (from SAN to LAN or to any) it does not ...

Hi,can i configure R-200 with Teaming Active\Standby ?thanks,  

Testing 1.4(3q) and didnt make it far.  UCS Manager wont open any longer.  Show 1.4(3q) on home page but when you click launch the splash screen say 1.4(3l) and java download never finishes hanging in last 2% or so.  Anyone else seeing this ?d-