Unified Computing System Discussions

I replaced a new harddisk to faulty one in cisco ucs b200m5 blade server, but the new hadd showing as unconfigured good can some one help us  to make it online as other hdd working fine and there is no change in service profile as well.

[FSM:FAILED]: downloading Image Dom.xml from local(FSM:sam:dme:FirmwareDownloaderDownload).Remote-Invocation-Error: Unable to open downloaded Image# ID: 1308401Fabric Interconnect, Cause: fsm-failedCode: F009690Severity: Critical (all levels) I am ge...

This new version consolidates the two previous versioning schemes:4.x (UCS infra bundles in UMM and IMM; server bundles including X Series in UMM),5.x (X Series servers in IMM)New features are documented in the Release Notes for Cisco UCS Manager, Re...

Hi there, I want to use a 1.2TB SFF front-facing disk on a Cisco UCSC-C220-M5SX without RAID. The server has a UCSC-SATAIN-220M5 interposer card connecting A1 and A2 to the front plane. The disk is inserted in slot 1, and its LED lights up green. How...

Hello,Weird behavior when adding a vlan to a vNIC template...The vlan is not propagated to the associated service template and child server template... until we deassociate / re-associate the vNIC template to the vNIC of the service template...I gues...

All,My company is in the process of deploying three C220 M7 servers. We purchased three UCS-M2-HWRAID modules along with six 480GB SATA drives. The RAID modules with the drives were installed in the servers.It took some digging through the server set...

Recently installed TPMs into B480 M5 UCS hosts.  Running esxi 7.0.3w.  Using the same service profile for all hosts in the cluster. All hosts show Attestation Passed, Attested by vCenter Server, TPM version 2.0 but some show TXT true while others sho...

Hello FreindsBefore I perform the upgrade using the tools below, pls advise on Pre-deployment /Post-deployment before i screw my UCShttps://software.cisco.com/download/home/284296253/type/283850974/release/3.0(4s) THANKS

Hello freindCan i upgrade my UCS C220 M3 disks to SAS SSD Disks "UCS-SD800G12S4-EP 800 GB 2.5 inch Enterprise Performance 12G SAS SSD (10X endurance) SAS 800 GB"below my SAS Raid controller thanks a lot  

I updated my Cisco UCS M220 M5 and after upgrade , I cannot reach the CIMC interface again, I have severally changed the IP address of the CIMC through F8 (CIMC setup) still yet , I cannot reach it again. please advice... Can I use the Cisco-Huu apps...

Hello Freinds the temperature below is it normal ???   thanks a lot

Hi Team,We are using HX cluster managed by UCS, We are planning to add Datastore to vCenter using iCSCI. What steps we need to perform from UCS level, Like creation of vLAN , Creation of Service Profile and vNIC.