About Ccoria1989

Ccoria1989 · 01-28-2014

Hi ManishMy CUBE is 2921 with IOS Version 15.3(3)MRegards

Ccoria1989 · 01-28-2014

Hi I have a problem with my CUBE and its transcoders. Sometimes the transcoders doesn´t release the ...

Ccoria1989 · 01-22-2014

I forgot tell you that the problem starts when we starts production. In one week of tests never happ...

Ccoria1989 · 01-22-2014

Hi ManishThe calls afected are only calls from MPLS, all the PSTN calls works fine.The calls arrives...

Ccoria1989 · 01-22-2014

HiI have a problem with some calls, when a Contact Center Agent receives a call and answer it the ca...

Ccoria1989 · 12-18-2013

Hi Sureshsub2Our codecs should be like this:All devices behind CUCM should talk G711ulaw CUCM and SM...

Ccoria1989 · 12-17-2013

A correction from my last messegeThe call flow is like this:PSTN > R2 > GW > SIP > CVP > SIP > GW > ...

Ccoria1989 · 12-17-2013

HiWe have an issue with calls from PSTN. When we received a call from PSTN the caller hears an IVR a...

Ccoria1989 · 12-14-2013

Hi DavidThose are bad news, we have only one Admin account.The problem is that my customer forgot th...

Ccoria1989 · 12-13-2013

Hi ,we have a problem with password not working for CCMP login..is there anyway that we can reset th...

Ccoria1989 · 12-09-2013

Hi Brian It´s CUCM 9.0.All my IPCOMMs are on Advanced License.Then, is your recommendation that we d...

Ccoria1989 · 12-09-2013

Hi BrianI seeing that the License Advanced is used for my instance and the enhanced is not. I need t...

Ccoria1989 · 12-09-2013

Hi everyoneI have installed 2 licenses (Advanced and Enhanced) on my CUCM 9 but only one is used for...

Ccoria1989 · 11-13-2013

HiThe CSS are correct I have only one.RegardsSent from Cisco Technical Support iPhone App

Ccoria1989 · 11-10-2013

I have a CUCM 9 and UCCE 9 using Calabrio ONE recording. I have auto recording enabled on the phones...

Re: Transcoders stucks in active mode